+912267437972

+919022636025

enquiry@real-bolt.com

Contact Us

Titanium Grade 2 Washers Manufacturer & Exporter in India

Explore Titanium Grade 2 Washers Manufacturer & Exporter in India manufactured for demanding industrial applications with reliable strength, corrosion resistance and compliance with international standards.
Request a Quote
View Products

-250

Min Temp

600

Max Temp

🌡

600

Suitable for continuous service up to approximately 600°C under typical operating conditions.

⚡

900

Typical tensile strength around 900 MPa depending on product form and heat treatment.

🛡

Outstanding

Outstanding corrosion resistance in a wide range of industrial environments.

⚖

4.5

Typical density is approximately 4.5 g/cm³.

Product Overview

What are Titanium Grade 2 Washers?

Titanium Grade 2 washers are precision flat, spring, and custom-shaped washers manufactured from commercially pure titanium (UNS R50400), conforming to ASTM B265 and ASTM F67. Renowned for their exceptional corrosion resistance, low density, and high ductility, these washers are widely specified in critical assemblies where weight savings and immunity to chloride, seawater, and oxidizing acids are essential.

Titanium Grade 2 washers are non-magnetic, biocompatible, and maintain mechanical integrity from cryogenic temperatures up to 400°C. They are the preferred choice for bolted joints in chemical processing, marine, medical, and aerospace applications where stainless steel or nickel alloys may fail due to corrosion or weight constraints.

Quick Specifications

MaterialTitanium Grade 2
UNS NumberR50400
DIN Number3.7035
Material StandardASTM B265 / ASTM F67
Washer Standard (Metric)DIN 125 / DIN 127 / DIN 9021
Washer Standard (Inch)ASME B18.22.1
TypeFlat, Spring, Tab, Custom
Size RangeM3-M64 / 1/8"-2½"
Tensile Strength345 MPa (50 ksi) min
Yield Strength275 MPa (40 ksi) min
HardnessMax 160 HV
? All washers supplied with full traceability and PMI certification. Biocompatibility certification available for medical use.

Complete the Fastener Set

Other Titanium Grade 2 Fastener Products Available from RealBolt

RealBolt also manufactures the complete Titanium Grade 2 fastener range from certified titanium alloy bar stock, including Titanium Grade 2 Bolts, Titanium Grade 2 Nuts, Titanium Grade 2 Screws, Titanium Grade 2 Studs, and Titanium Grade 2 Threaded Rods. All Titanium Grade 2 fastener types are produced to ASTM with full EN 10204 MTC 3.1/3.2 documentation.
Titanium Grade 2 Bolts
Titanium Grade 2 Nuts
Titanium Grade 2 Screws
Titanium Grade 2 Studs
Titanium Grade 2 Threaded Rods

Technical Data

Titanium Grade 2 Washers Dimensions, Sizes & Thread Standards

Titanium Grade 2 Washers are available in metric M6–M100 and inch ¼″–4″ as standard. Metric washers per DIN 125 (flat), DIN 127 (spring), DIN 9021 (large OD). Inch washers per ASME B18.22.1. Custom OD/ID/Thickness on request. All Titanium Grade 2 washers dimensions are verified against applicable DIN, ISO, and ASME

Flat Washer Dimensions - Metric (DIN 125)

Size (M)ID (mm)OD (mm)Thickness (mm)
M33.270.5
M66.4121.6
M88.4161.6
M1010.5202.0
M1213.0242.5
M1617.0303.0
M2021.0373.0
M2425.0444.0
M3031.0564.0
M3637.0665.0
M4243.0786.0
M4849.0926.0
M5657.01058.0
M6465.01158.0

Dimensional & Material Standards

StandardCoversType
DIN 125Flat washersMetric
DIN 127Spring lock washersMetric
DIN 9021Large OD washersMetric
ASME B18.22.1Plain & lock washersInch
ISO 7089Flat washersMetric
ISO 7090Chamfered washersMetric
Material StandardRequirement
ASTM B265Plate/sheet - Gr 2
ASTM F67Unalloyed Ti fasteners
EN 10204 3.1Mill test certificate
EN 10204 3.2TPI-witnessed MTC

Material Chemistry

Titanium Grade 2 Chemical Composition

Titanium Grade 2 Washers are manufactured from commercially pure or alloyed titanium with elemental limits strictly controlled per ASTM and AMS specifications. Oxygen and nitrogen contents govern strength and ductility in CP grades; aluminium and vanadium additions in Ti-6Al-4V (Grade 5) deliver 896 MPa tensile strength at 4.43 g/cm³ density.

Chemical Composition per ASTM B265 / F67

ElementComposition (%)
Titanium (Ti)Balance
Iron (Fe)0.30% max
Oxygen (O)0.25% max
Carbon (C)0.08% max
Nitrogen (N)0.03% max
Hydrogen (H)0.015% max
Other Elements (each)0.10% max
Other Elements (total)0.40% max
? All heats spectro-tested and certified by NABL-accredited laboratory. Biocompatibility and PMI available on request.

Why Titanium Grade 2 Alloy Composition Matters for Washers

High Purity Titanium — Corrosion Resistance
The low content of iron, oxygen, and interstitial elements ensures Titanium Grade 2 washers are highly resistant to corrosion in seawater, chlorides, and oxidizing acids, making them ideal for marine and chemical plant bolted joints.
Low Carbon & Oxygen — Ductility & Weldability
Strict limits on carbon and oxygen maintain ductility and allow washers to be cold-formed or welded without embrittlement, ensuring reliable sealing and load distribution in critical assemblies.
Biocompatibility
Titanium Grade 2’s composition is certified biocompatible, making these washers suitable for medical implants, surgical devices, and pharmaceutical equipment where contact with tissue or fluids occurs.

Fastener Performance

Titanium Grade 2 Washers Mechanical Properties & Torque Reference

The table below lists mechanical properties and torque reference for Titanium Grade 2 Washers per ASTM. Titanium Grade 2 washers achieve 900 MPa tensile strength, with hardness, yield, and elongation values verified by NABL-accredited testing and reported in the EN 10204 MTC.

Bolt SizeRecommended Washer OD (mm)Recommended Thickness (mm)
M6121.6
M8161.6
M10202.0
M12242.5
M16303.0
M20373.0
M24444.0
M30564.0
M36665.0
?? Washer Selection: Use matching titanium washers with titanium or stainless bolts to prevent galvanic corrosion. For high preload, select thicker washers to avoid deformation.

Industry Applications

Titanium Grade 2 Washers Applications — Industries & End Uses

Titanium Grade 2 Washers from RealBolt are specified across aerospace, marine, chemical processing, and medical devices where outstanding corrosion resistance and 900 MPa tensile strength are required for reliable fastener performance. Click each industry below for detailed application examples. Select an industry below to see specific Titanium Grade 2 washers application details and RealBolt stock availability.
Titanium Grade 2 washers are used in bolted joints for heat exchangers, pressure vessels, and piping systems handling chlorides, hypochlorites, and oxidizing acids. Their resistance to crevice corrosion ensures long-term sealing in flange and gasketed connections.
Flat and spring washers for seawater-cooled condensers, desalination plants, and shipboard piping. Titanium’s immunity to seawater pitting and biofouling makes these washers ideal for submerged and splash-zone assemblies.
Biocompatible washers for surgical instruments, implantable devices, and cleanroom equipment. Certified to ASTM F67 for use in direct or indirect contact with tissue and fluids.
Lightweight washers for airframe, engine, and landing gear assemblies where weight reduction and corrosion resistance are critical. Used in both structural and non-structural bolted joints.

Titanium Grade 2 Washers Standards & International Certifications

Titanium Grade 2 Washers from RealBolt Engineering Industries are manufactured to internationally recognised fastener dimensional standards covering thread form, tolerances, strength grades, and quality requirements. Every batch ships with EN 10204 MTC 3.1/3.2, AMS material certification, AS 9100D traceability for aerospace grades, and NABL lab reports — available on request for all orders.
Standards
DIN 125A DIN 127 ISO 7089 ISO 7090 ASME B18.21.1 IS 1367
Certifications
ISO 9001:2015PED 2014/68/EUNABL LabMTC 3.1 / 3.2Biocompatibility

Buy Titanium Grade 2 Washers from India's Leading Manufacturer — Get a Competitive Quote Today

Partner with RealBolt — India’s leading manufacturer of certified Titanium Grade 2 Washers — for competitive pricing, EN 10204 MTC 3.1/3.2 documentation, and fast Mumbai dispatch. Standard sizes are ex-stock; custom dimensions accepted with 2–3 week lead time. Request your quote today.
022-6743-7972
+91 90226 36025
Email Us

Answers for Buyers

Titanium Grade 2 Washers — Frequently Asked Questions

Browse expert answers to common questions about Titanium Grade 2 Washers from RealBolt — covering grade selection, ASTM B348/F467, seawater immunity, weight saving, galling precautions, and certification. Contact our technical team directly for project-specific guidance on Titanium Grade 2 washers selection and pricing.
Titanium Grade 2 washers are available to DIN 125 (flat), DIN 127 (spring), DIN 9021 (large OD), ISO 7089/7090, and ASME B18.22.1 (inch). Custom dimensions and special shapes (tab, square, conical) can be supplied to drawing with short lead times.
Yes, Titanium Grade 2 washers can be used with stainless steel bolts, but it is recommended to use matching titanium fasteners in highly corrosive or marine environments to avoid galvanic corrosion. For critical assemblies, consult our engineering team for optimal material pairing.
Absolutely. Titanium Grade 2 washers are certified biocompatible per ASTM F67 and ISO 10993, making them suitable for surgical instruments, implantable devices, and pharmaceutical equipment. Certificates of biocompatibility and traceability are provided on request.
Standard sizes (M6-M24) are available ex-stock with no MOQ-single pieces can be supplied for urgent needs. Custom sizes or shapes typically require a 5 kg minimum order. Quantity discounts apply at 100, 500, and 1000 pieces.

Industrial Cities We Serve:

  • Ahmedabad
  • Aurangabad
  • Bengaluru
  • Chennai
  • Coimbatore
  • Faridabad
  • Gandhidham
  • Greater Noida
  • Gurugram
  • Hazira
  • Hosur
  • Hyderabad
  • Jamnagar
  • Jamshedpur
  • Ludhiana
  • Mumbai
  • Mundra
  • Mysuru
  • Nagpur
  • Nashik
  • Navi Mumbai
  • Noida
  • Pune
  • Rajkot
  • Sanand
  • Surat
  • Thane
  • Tiruppur
  • Vadodara
  • Visakhapatnam

Countries We Export To:

  • US
  • Canada
  • Mexico
  • Germany
  • UK
  • France
  • Italy
  • Spain
  • Netherlands
  • Belgium
  • Poland
  • Sweden
  • Norway
  • Denmark
  • Turkey
  • UAE
  • Saudi Arabia
  • Qatar
  • Oman
  • Kuwait
  • Bahrain
  • South Africa
  • Egypt
  • Nigeria
  • Australia
  • New Zealand
  • Singapore
  • Malaysia
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Brazil