+912267437972

+919022636025

enquiry@real-bolt.com

Contact Us

Titanium Grade 2 Threaded Rods Manufacturer & Exporter in India

Explore Titanium Grade 2 Threaded Rods Manufacturer & Exporter in India manufactured for demanding industrial applications with reliable strength, corrosion resistance and compliance with international standards.
Request a Quote
View Products

-250

Min Temp

600

Max Temp

🌡

600

Suitable for continuous service up to approximately 600°C under typical operating conditions.

⚡

900

Typical tensile strength around 900 MPa depending on product form and heat treatment.

🛡

Outstanding

Outstanding corrosion resistance in a wide range of industrial environments.

⚖

4.5

Typical density is approximately 4.5 g/cm³.

Product Overview

What are Titanium Grade 2 Threaded Rods?

Titanium Grade 2 threaded rods are precision fasteners manufactured from commercially pure titanium (UNS R50400), conforming to ASTM B348 and ASTM F67 standards. These rods offer an exceptional combination of moderate strength, outstanding corrosion resistance, and low density, making them ideal for critical applications where weight savings and biocompatibility are essential.

Titanium Grade 2 threaded rods are widely specified for use in chemical processing, marine, medical, and aerospace industries due to their resistance to chlorides, seawater, and a wide range of acids. Their non-magnetic and non-toxic properties further enhance their suitability for sensitive environments and medical implants.

Quick Specifications

MaterialTitanium Grade 2
UNS NumberR50400
DIN Number3.7035
Material StandardASTM B348 / ASTM F67
Rod Standard (Metric)DIN 976 / ISO 898-1
Rod Standard (Inch)ASME B18.31.3
Thread FormISO Metric / UNC / UNF
Diameter RangeM6-M64 / ¼"-2½"
Tensile Strength345 MPa (50 ksi) min
Yield Strength275 MPa (40 ksi) min
HardnessMax 160 HB
? All material certified by NABL-accredited laboratory. PMI and ultrasonic testing available on request.

Complete the Fastener Set

Other Titanium Grade 2 Fastener Products Available from RealBolt

RealBolt also manufactures the complete Titanium Grade 2 fastener range from certified titanium alloy bar stock, including Titanium Grade 2 Bolts, Titanium Grade 2 Nuts, Titanium Grade 2 Screws, Titanium Grade 2 Washers, and Titanium Grade 2 Studs. All Titanium Grade 2 fastener types are produced to ASTM with full EN 10204 MTC 3.1/3.2 documentation.
Titanium Grade 2 Bolts
Titanium Grade 2 Nuts
Titanium Grade 2 Screws
Titanium Grade 2 Washers
Titanium Grade 2 Studs

Technical Data

Titanium Grade 2 Threaded Rods Dimensions, Sizes & Thread Standards

Titanium Grade 2 Threaded Rods are available in metric M6–M100 and inch ¼″–4″ as standard. Per DIN 976 (metric) and ASME B18.31.3 (inch). Custom lengths available in 10mm increments. Special thread forms and cut lengths on request. All Titanium Grade 2 threaded rods dimensions are verified against applicable DIN, ISO,

Threaded Rod Dimensions - Metric (DIN 976)

Size (M)Pitch (mm)Rod Diameter (mm)Standard Length (mm)Max Length (mm)
M61.06.010003000
M81.258.010003000
M101.510.010003000
M121.7512.010003000
M162.016.010003000
M202.520.010003000
M243.024.010003000
M303.530.010003000
M364.036.010003000
M424.542.010003000
M485.048.010003000
M565.556.010003000
M646.064.010003000

Dimensional & Material Standards

StandardCoversThread
DIN 976Threaded rods, metricMetric
ASME B18.31.3Threaded rods, inchUNC/UNF
ISO 898-1Mechanical propertiesMetric
ISO 965General purpose threadsMetric
Material StandardRequirement
ASTM B348Bar/rod - UNS R50400
ASTM F67Unalloyed titanium for surgical implant
EN 10204 3.1Mill test certificate
EN 10204 3.2TPI-witnessed MTC

Material Chemistry

Titanium Grade 2 Chemical Composition

Titanium Grade 2 Threaded Rods are manufactured from commercially pure or alloyed titanium with elemental limits strictly controlled per ASTM and AMS specifications. Oxygen and nitrogen contents govern strength and ductility in CP grades; aluminium and vanadium additions in Ti-6Al-4V (Grade 5) deliver 896 MPa tensile strength at 4.43 g/cm³ density.

Chemical Composition per ASTM B348

ElementComposition (%)
Titanium (Ti)Balance
Iron (Fe)0.30% max
Oxygen (O)0.25% max
Carbon (C)0.08% max
Nitrogen (N)0.03% max
Hydrogen (H)0.015% max
Other Elements (each)0.10% max
Other Elements (total)0.40% max
? All heats verified by NABL-accredited spectrometry. PMI and interstitial analysis available on request.

Why Titanium Grade 2 Alloy Composition Matters for Threaded Rods

High Purity Titanium — Corrosion Resistance
The low content of interstitial elements (O, N, C, H) ensures excellent resistance to corrosion in oxidizing and reducing environments, including chlorides, acids, and seawater, making Grade 2 threaded rods ideal for marine and chemical plant use.
Low Iron Content — Ductility & Weldability
With iron limited to 0.30% max, Titanium Grade 2 maintains high ductility and is easily weldable, allowing rods to be cut, joined, or fabricated without embrittlement or loss of corrosion resistance.
Biocompatibility — Medical & Food Applications
The absence of toxic alloying elements and the high purity of Grade 2 titanium make these rods suitable for medical implants, food processing, and pharmaceutical equipment where non-reactivity is critical.

Fastener Performance

Titanium Grade 2 Threaded Rods Mechanical Properties & Torque Reference

The table below lists mechanical properties and torque reference for Titanium Grade 2 Threaded Rods per ASTM. Titanium Grade 2 threaded rods achieve 900 MPa tensile strength, with hardness, yield, and elongation values verified by NABL-accredited testing and reported in the EN 10204 MTC.

Rod SizeDry (Nm)Lubricated (Nm)Clamp Load (kN)
M8181413
M10362921
M12625030
M1615012055
M2029523686
M24510408124
M301020816200
M3617801424290
?? Anti-galling: Use molybdenum-based or PTFE anti-seize. Lubricated values assume K=0.16. Avoid copper-based anti-seize for titanium to prevent galvanic corrosion.

Industry Applications

Titanium Grade 2 Threaded Rods Applications — Industries & End Uses

Titanium Grade 2 Threaded Rods from RealBolt are specified across aerospace, marine, chemical processing, and medical devices where outstanding corrosion resistance and 900 MPa tensile strength are required for reliable fastener performance. Click each industry below for detailed application examples.
Titanium Grade 2 threaded rods are the preferred choice for bolting in chlorine, caustic, and acid process lines, heat exchangers, and reactor vessels due to their resistance to oxidizing and reducing acids, including hydrochloric and nitric acid environments.
Used for structural and equipment fastening in desalination plants, shipbuilding, and offshore platforms, these rods provide long-term resistance to seawater, brine, and marine atmospheres, preventing crevice and pitting corrosion.
Threaded rods for medical device frames, surgical equipment, and pharmaceutical process machinery, where biocompatibility, non-toxicity, and resistance to sterilization chemicals are essential.
Titanium Grade 2 rods are specified for lightweight structural assemblies, satellite hardware, and aircraft interiors, offering high strength-to-weight ratio and non-magnetic properties for sensitive avionics and instrumentation.

Titanium Grade 2 Threaded Rods Standards & International Certifications

Titanium Grade 2 Threaded Rods from RealBolt Engineering Industries are manufactured to internationally recognised fastener dimensional standards covering thread form, tolerances, strength grades, and quality requirements. Every batch ships with EN 10204 MTC 3.1/3.2, AMS material certification, AS 9100D traceability for aerospace grades, and NABL lab reports — available on request for all orders.
Standards
DIN 975 DIN 976-1 ASME B18.31.2 IS 1367
Certifications
ISO 9001:2015PED 2014/68/EUNABL LabMTC 3.1 / 3.2CE Marking

Buy Titanium Grade 2 Threaded Rods from India's Leading Manufacturer — Get a Competitive Quote Today

Partner with RealBolt — India’s leading manufacturer of certified Titanium Grade 2 Threaded Rods — for competitive pricing, EN 10204 MTC 3.1/3.2 documentation, and fast Mumbai dispatch. Standard sizes are ex-stock; custom dimensions accepted with 2–3 week lead time. Request your quote today.
022-6743-7972
+91 90226 36025
Email Us

Answers for Buyers

Titanium Grade 2 Threaded Rods — Frequently Asked Questions

Browse expert answers to common questions about Titanium Grade 2 Threaded Rods from RealBolt — covering grade selection, ASTM B348/F467, seawater immunity, weight saving, galling precautions, and certification. Contact our technical team directly for project-specific guidance on Titanium Grade 2 threaded rods selection and pricing.
Titanium Grade 2 threaded rods are available to DIN 976 (metric), ASME B18.31.3 (inch), and ISO 898-1 for mechanical properties. Custom thread forms (UNC, UNF, BSW, Whitworth) and special cut lengths are available on request. All rods are supplied with full traceability and EN 10204 3.1 certification.
Use molybdenum-based or PTFE anti-seize compound (such as Molykote 1000 or Loctite LB 8014) on Titanium Grade 2 threaded rods. Apply to threads and nut faces to prevent galling. Avoid copper-based anti-seize to prevent galvanic corrosion with titanium. Lubricated torque values should be reduced by 20% compared to dry assembly.
Yes – Titanium Grade 2 offers outstanding resistance to seawater, chlorides, and a wide range of acids and alkalis. It is the preferred material for threaded rods in desalination, marine, and chemical processing plants where stainless steel is prone to pitting or crevice corrosion. No special coatings are required for marine immersion.
No formal MOQ for standard sizes (M8-M30) held in stock – we supply from single rods for urgent requirements. Custom diameters and cut lengths have an MOQ of 5 kg. Price breaks are available at 25, 100, and 250 rods. All orders include full certification and traceability.

Industrial Cities We Serve:

  • Ahmedabad
  • Aurangabad
  • Bengaluru
  • Chennai
  • Coimbatore
  • Faridabad
  • Gandhidham
  • Greater Noida
  • Gurugram
  • Hazira
  • Hosur
  • Hyderabad
  • Jamnagar
  • Jamshedpur
  • Ludhiana
  • Mumbai
  • Mundra
  • Mysuru
  • Nagpur
  • Nashik
  • Navi Mumbai
  • Noida
  • Pune
  • Rajkot
  • Sanand
  • Surat
  • Thane
  • Tiruppur
  • Vadodara
  • Visakhapatnam

Countries We Export To:

  • US
  • Canada
  • Mexico
  • Germany
  • UK
  • France
  • Italy
  • Spain
  • Netherlands
  • Belgium
  • Poland
  • Sweden
  • Norway
  • Denmark
  • Turkey
  • UAE
  • Saudi Arabia
  • Qatar
  • Oman
  • Kuwait
  • Bahrain
  • South Africa
  • Egypt
  • Nigeria
  • Australia
  • New Zealand
  • Singapore
  • Malaysia
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Brazil