Titanium Grade 5 (Ti-6Al-4V) Bolts Manufacturer & Exporter in India

Explore Titanium Grade 5 (Ti-6Al-4V) Bolts Manufacturer & Exporter in India manufactured for demanding industrial applications with reliable strength, corrosion resistance and compliance with international standards.

-250

Min Temp

600

Max Temp

🌡

600

Suitable for continuous service up to approximately 600°C under typical operating conditions.

⚡

900

Typical tensile strength around 900 MPa depending on product form and heat treatment.

🛡

Outstanding

Outstanding corrosion resistance in a wide range of industrial environments.

⚖

4.5

Typical density is approximately 4.5 g/cm³.

Product Overview

What are Titanium Grade 5 (Ti-6Al-4V) Bolts?

Titanium Grade 5 (Ti-6Al-4V) bolts are high-performance fasteners manufactured from the alpha-beta titanium alloy UNS R56400, conforming to ASTM B348 and ASTM F468 standards. This alloy contains 6% aluminium and 4% vanadium, providing an exceptional combination of high strength-to-weight ratio, corrosion resistance, and elevated temperature performance.

Ti-6Al-4V bolts are widely specified in aerospace, marine, chemical processing, and motorsport applications where weight savings and resistance to aggressive environments are critical. The alloys tensile strength exceeds 895 MPa, while its density is just 56% that of steel, making it the industry standard for critical bolted joints in demanding environments.

Quick Specifications

Material	Titanium Grade 5 (Ti-6Al-4V)
UNS Number	R56400
DIN Number	3.7165
Material Standard	ASTM B348 / ASTM F468
Bolt Standard (Metric)	DIN 931 / DIN 933 / ISO 4014
Bolt Standard (Inch)	ASME B18.2.1
Thread Form	ISO Metric / UNC / UNF
Diameter Range	M3-M64 / 1/8"-2½"
Tensile Strength	895 MPa (130 ksi) min
Yield Strength	828 MPa (120 ksi) min
Hardness	Max 36 HRC / 349 HB

? All material certified by NABL-accredited laboratory. PMI and ultrasonic testing available on request.

Complete the Fastener Set

Other Titanium Grade 5 (Ti-6Al-4V) Fastener Products Available from RealBolt

RealBolt also manufactures the complete Titanium Grade 5 (Ti-6Al-4V) fastener range — Titanium Grade 5 (Ti-6Al-4V) Nuts, Titanium Grade 5 (Ti-6Al-4V) Screws, Titanium Grade 5 (Ti-6Al-4V) Washers, Titanium Grade 5 (Ti-6Al-4V) Studs, Titanium Grade 5 (Ti-6Al-4V) Threaded Rods — from certified bar stock per ASTM with full EN 10204 MTC 3.1/3.2 documentation and fast Mumbai dispatch.

Titanium Grade 5 (Ti-6Al-4V) Nuts

Titanium Grade 5 (Ti-6Al-4V) Screws

Titanium Grade 5 (Ti-6Al-4V) Washers

Titanium Grade 5 (Ti-6Al-4V) Studs

Titanium Grade 5 (Ti-6Al-4V) Threaded Rods

Technical Data

Titanium Grade 5 (Ti-6Al-4V) Bolts Dimensions, Sizes & Thread Standards

Titanium Grade 5 (Ti-6Al-4V) Bolts are available in metric M6–M100 and inch ¼″–4″ as standard. Per DIN 931 (partial thread) / DIN 933 (full thread) / ISO 4014. Custom lengths in 5mm increments. Inch dimensions available per ASME B18.2.1. All Titanium Grade 5 (Ti-6Al-4V) bolts dimensions conform to applicable DIN, ISO, and ASME B18 standards.

Hex Bolt Dimensions - Metric (DIN 931 / ISO 4014)

Size (M)	Pitch (mm)	A/F (mm)	Head Ht (mm)	Min L (mm)	Max L (mm)
M6	1.0	10	4.0	10	200
M8	1.25	13	5.3	12	250
M10	1.5	17	6.4	16	300
M12	1.75	19	7.5	20	400
M16	2.0	24	10.0	25	500
M20	2.5	30	12.5	30	600
M24	3.0	36	15.0	40	600
M30	3.5	46	18.7	50	800
M36	4.0	55	22.5	60	1000
M42	4.5	65	26.0	80	1000
M48	5.0	75	30.0	100	1200
M56	5.5	85	35.0	120	1500
M64	6.0	95	40.0	140	2000

Dimensional & Material Standards

Standard	Covers	Thread
DIN 931	Hex bolts, partial thread	Metric
DIN 933	Hex bolts, full thread	Metric
ISO 4014	Hex head screws, partial	Metric
ISO 4017	Hex head screws, full	Metric
ASME B18.2.1	Hex & heavy hex bolts	UNC/UNF
ASME B16.5	Stud bolts for flanges	UNC
MSS SP-75	Stud bolts, high-pressure	UNC

Material Standard	Requirement
ASTM B348	Bar/rod - UNS R56400
ASTM F468	Fastener mechanical
AMS 4928	Aerospace bar/rod
EN 10204 3.1	Mill test certificate
EN 10204 3.2	TPI-witnessed MTC

Material Chemistry

Titanium Grade 5 (Ti-6Al-4V) Chemical Composition

Titanium Grade 5 (Ti-6Al-4V) Bolts are manufactured from commercially pure or alloyed titanium with elemental limits strictly controlled per ASTM and AMS specifications. Oxygen and nitrogen contents govern strength and ductility in CP grades; aluminium and vanadium additions in Ti-6Al-4V (Grade 5) deliver 896 MPa tensile strength at 4.43 g/cm³ density.

Chemical Composition per ASTM B348

Element	Composition (%)
Titanium (Ti)	Balance
Aluminium (Al)	5.5-6.75
Vanadium (V)	3.5-4.5
Iron (Fe)	0.40 max
Oxygen (O)	0.20 max
Carbon (C)	0.08 max
Nitrogen (N)	0.05 max
Hydrogen (H)	0.015 max
Other Elements	0.40 max (each 0.10)

? All heats verified by NABL-accredited spectrometry. PMI and interstitial analysis available on request.

Why Titanium Grade 5 (Ti-6Al-4V) Alloy Composition Matters for Bolts

Al (6%) + V (4%) — Strength & Ductility

Aluminium and vanadium additions provide a unique balance of high tensile strength and ductility, allowing Ti-6Al-4V bolts to withstand high preload and dynamic loads without brittle failure.

Low Interstitials — Fatigue & Creep Resistance

Strict control of oxygen, nitrogen, and hydrogen ensures excellent fatigue life and resistance to stress rupture at elevated temperatures, making these bolts ideal for aerospace and high-cycling applications.

Corrosion Resistance — Chloride & Acidic Media

Titaniums passive oxide film provides outstanding resistance to seawater, chlorides, and a wide range of acids, ensuring long-term bolt integrity in marine and chemical environments.

Fastener Performance

Titanium Grade 5 (Ti-6Al-4V) Bolts Mechanical Properties & Torque Reference

The table below lists mechanical properties and torque reference for Titanium Grade 5 (Ti-6Al-4V) Bolts per ASTM. Titanium Grade 5 (Ti-6Al-4V) bolts achieve 900 MPa tensile strength, with hardness, yield, and elongation values verified by NABL-accredited testing and reported in the EN 10204 MTC.

Bolt Size	Dry (Nm)	Lubricated (Nm)	Clamp Load (kN)
M8	28	22	18
M10	56	45	29
M12	98	78	42
M16	240	192	85
M20	470	376	133
M24	820	656	192
M30	1650	1320	314

?? Anti-galling: Use molybdenum-based or PTFE anti-seize. Lubricated values assume K=0.18. Titanium is prone to galling-never assemble dry for critical joints.

Industry Applications

Titanium Grade 5 (Ti-6Al-4V) Bolts Applications — Industries & End Uses

Titanium Grade 5 (Ti-6Al-4V) Bolts from RealBolt are specified across aerospace, marine, chemical processing, and medical devices where outstanding corrosion resistance and 900 MPa tensile strength are required for reliable fastener performance. Click each industry below for detailed application examples.

Aerospace - Airframe & Engine

Titanium Grade 5 bolts are the industry standard for airframe structural joints, engine nacelle assemblies, landing gear, and control surface attachments due to their high strength-to-weight ratio and fatigue resistance. AMS 4967 and AMS 4928 specifications are commonly referenced for aerospace hardware.

Marine & Offshore Structures

Hex bolts and stud bolts for shipbuilding, offshore platform riser clamps, and subsea equipment where long-term resistance to seawater and marine atmospheres is required. Titaniums immunity to chloride pitting ensures maintenance-free service.

Chemical Processing & Desalination

Flange bolts and fasteners for heat exchangers, pressure vessels, and piping systems in chlor-alkali, desalination, and acid leaching plants. Grade 5 bolts resist attack from chlorides, hypochlorites, and oxidizing acids where stainless steel fails.

Motorsport & Performance Engineering

Used in racing car suspension, brake, and drivetrain assemblies where every gram counts. Ti-6Al-4V bolts provide maximum strength with minimal weight, improving acceleration and handling in Formula 1, MotoGP, and aerospace-derived performance vehicles.

Titanium Grade 5 (Ti-6Al-4V) Bolts Standards & International Certifications

Titanium Grade 5 (Ti-6Al-4V) Bolts from RealBolt Engineering Industries are manufactured to internationally recognised fastener dimensional standards covering thread form, tolerances, strength grades, and quality requirements. Every batch ships with EN 10204 MTC 3.1/3.2, AMS material certification, AS 9100D traceability for aerospace grades, and NABL lab reports — available on request for all orders.

Standards

DIN 931 DIN 933 DIN 912 ISO 4014 ISO 4017 ISO 4762 ASME B18.2.1 ASME B18.3 IS 1367

Certifications

ISO 9001:2015PED 2014/68/EUNABL LabEN 10204 3.1 / 3.2

Buy Titanium Grade 5 (Ti-6Al-4V) Bolts from India's Leading Manufacturer — Get a Competitive Quote Today

Partner with RealBolt — India’s leading manufacturer of certified Titanium Grade 5 (Ti-6Al-4V) Bolts — for competitive pricing, EN 10204 MTC 3.1/3.2 documentation, and fast Mumbai dispatch. Standard sizes are ex-stock; custom dimensions accepted with 2–3 week lead time. Request your quote today.

Answers for Buyers

Titanium Grade 5 (Ti-6Al-4V) Bolts — Frequently Asked Questions

Browse expert answers to common questions about Titanium Grade 5 (Ti-6Al-4V) Bolts from RealBolt — covering grade selection, ASTM B348/F467, seawater immunity, weight saving, galling precautions, and certification. Contact our technical team directly for project-specific guidance on Titanium Grade 5 (Ti-6Al-4V) bolts selection and pricing.

What bolt standards are available for Titanium Grade 5 (Ti-6Al-4V) hex bolts?

Titanium Grade 5 hex bolts are available to DIN 931 (metric partial thread), DIN 933 (metric full thread), ISO 4014/4017, and ASME B18.2.1 (inch hex and heavy hex). Stud bolts are supplied per ASME B16.5 for flange applications. Custom thread forms (BSW, BSF, Whitworth, BSPP) are available on request with typical lead times of 2-3 weeks.

What anti-seize should I use on Titanium Grade 5 bolts?

Use molybdenum-based or PTFE anti-seize compound (such as Molykote 1000 or Loctite LB 8014) on threads and nut bearing faces. Titanium is highly prone to galling-never assemble dry. Avoid copper-based anti-seize, as galvanic corrosion may occur in marine or chemical environments.

Are Titanium Grade 5 bolts suitable for seawater and marine immersion?

Yes – Titanium Grade 5 (Ti-6Al-4V) bolts are completely resistant to pitting, crevice, and stress corrosion cracking in seawater, even at elevated temperatures. They are widely used in offshore, shipbuilding, and desalination plant applications where stainless steel fasteners fail.

What is the minimum order quantity (MOQ) for Titanium Grade 5 bolts?

No formal MOQ for standard sizes (M6-M24) held ex-stock – we supply from single pieces for urgent requirements. Custom sizes or non-standard threads typically require a 5 kg minimum. Quantity price breaks are available at 25 pcs, 100 pcs, and 500 pcs.

Industrial Cities We Serve:

Ahmedabad
Aurangabad
Bengaluru
Chennai
Coimbatore
Faridabad
Gandhidham
Greater Noida
Gurugram
Hazira
Hosur
Hyderabad
Jamnagar
Jamshedpur
Ludhiana
Mumbai
Mundra
Mysuru
Nagpur
Nashik
Navi Mumbai
Noida
Pune
Rajkot
Sanand
Surat
Thane
Tiruppur
Vadodara
Visakhapatnam

Countries We Export To:

US
Canada
Mexico
Germany
UK
France
Italy
Spain
Netherlands
Belgium
Poland
Sweden
Norway
Denmark
Turkey
UAE
Saudi Arabia
Qatar
Oman
Kuwait
Bahrain
South Africa
Egypt
Nigeria
Australia
New Zealand
Singapore
Malaysia
Indonesia
Thailand
Vietnam
South Korea
Japan
Brazil

Product Categories

Popular

Material Categories