+912267437972

+919022636025

enquiry@real-bolt.com

Contact Us

Titanium Grade 5 (Ti-6Al-4V) Screws Manufacturer & Exporter in India

Explore Titanium Grade 5 (Ti-6Al-4V) Screws Manufacturer & Exporter in India manufactured for demanding industrial applications with reliable strength, corrosion resistance and compliance with international standards.
Request a Quote
View Products

-250

Min Temp

600

Max Temp

🌡

600

Suitable for continuous service up to approximately 600°C under typical operating conditions.

⚡

900

Typical tensile strength around 900 MPa depending on product form and heat treatment.

🛡

Outstanding

Outstanding corrosion resistance in a wide range of industrial environments.

⚖

4.5

Typical density is approximately 4.5 g/cm³.

Product Overview

What are Titanium Grade 5 (Ti-6Al-4V) Screws?

Titanium Grade 5 (Ti-6Al-4V) screws are high-performance fasteners manufactured from the alpha-beta titanium alloy UNS R56400, conforming to ASTM B348 and ASTM F136 standards. This alloy contains 6% aluminium and 4% vanadium, providing an exceptional combination of high strength-to-weight ratio, corrosion resistance, and excellent fatigue properties. Titanium Grade 5 screws are widely specified in aerospace, marine, medical, and high-performance engineering applications where weight savings and reliability are critical.

With a minimum tensile strength of 895 MPa and outstanding resistance to chloride-induced corrosion, Ti-6Al-4V screws are the industry standard for demanding bolted joints in aggressive environments, including saltwater, chemical processing, and high-temperature service up to 400°C.

Quick Specifications

MaterialTitanium Grade 5 (Ti-6Al-4V)
UNS NumberR56400
DIN Number3.7165
Material StandardASTM B348 / ASTM F136
Screw Standard (Metric)DIN 912 / DIN 7991 / ISO 4762
Screw Standard (Inch)ASME B18.3
Thread FormISO Metric / UNC / UNF
Diameter RangeM3-M36 / #4-1½"
Tensile Strength895 MPa (130 ksi) min
Yield Strength828 MPa (120 ksi) min
HardnessMax 36 HRC / 349 HV
? All material certified by NABL-accredited laboratory. PMI and ultrasonic testing available on request.

Complete the Fastener Set

Other Titanium Grade 5 (Ti-6Al-4V) Fastener Products Available from RealBolt

RealBolt also manufactures the complete Titanium Grade 5 (Ti-6Al-4V) fastener range — Titanium Grade 5 (Ti-6Al-4V) Bolts, Titanium Grade 5 (Ti-6Al-4V) Nuts, Titanium Grade 5 (Ti-6Al-4V) Washers, Titanium Grade 5 (Ti-6Al-4V) Studs, Titanium Grade 5 (Ti-6Al-4V) Threaded Rods — from certified bar stock per ASTM with full EN 10204 MTC 3.1/3.2 documentation and fast Mumbai dispatch.
Titanium Grade 5 (Ti-6Al-4V) Bolts
Titanium Grade 5 (Ti-6Al-4V) Nuts
Titanium Grade 5 (Ti-6Al-4V) Washers
Titanium Grade 5 (Ti-6Al-4V) Studs
Titanium Grade 5 (Ti-6Al-4V) Threaded Rods

Technical Data

Titanium Grade 5 (Ti-6Al-4V) Screws Dimensions, Sizes & Thread Standards

Titanium Grade 5 (Ti-6Al-4V) Screws are available in metric M6–M100 and inch ¼″–4″ as standard. Per DIN 912 (socket head cap), DIN 7991 (countersunk), ISO 4762 (hex socket). Custom lengths in 5mm increments. Inch dimensions available per ASME B18.3. All Titanium Grade 5 (Ti-6Al-4V) screws dimensions conform to applicable DIN, ISO, and ASME B18 standards.

Socket Head Cap Screw Dimensions - Metric (DIN 912 / ISO 4762)

Size (M)Pitch (mm)Head Dia (mm)Head Ht (mm)Hex Socket (mm)Min L (mm)Max L (mm)
M30.55.53.02.5650
M40.77.04.03.0860
M50.88.55.04.01070
M61.010.06.05.01280
M81.2513.08.06.016100
M101.516.010.08.020120
M121.7518.012.010.025150
M162.024.016.014.030200
M202.530.020.017.035250
M243.036.024.019.040300
M303.545.030.022.050400
M364.054.036.027.060500

Dimensional & Material Standards

StandardCoversThread
DIN 912Socket head cap screwsMetric
DIN 7991Countersunk socket screwsMetric
ISO 4762Hex socket head screwsMetric
ASME B18.3Socket cap, flat, button headUNC/UNF
ISO 14580Low head socket screwsMetric
ISO 7380Button head socket screwsMetric
Material StandardRequirement
ASTM B348Bar/rod - Ti-6Al-4V
ASTM F136Medical implant grade
AMS 4928Aerospace bar/rod
EN 10204 3.1Mill test certificate
EN 10204 3.2TPI-witnessed MTC

Material Chemistry

Titanium Grade 5 Chemical Composition

Titanium Grade 5 (Ti-6Al-4V) Screws are manufactured from commercially pure or alloyed titanium with elemental limits strictly controlled per ASTM and AMS specifications. Oxygen and nitrogen contents govern strength and ductility in CP grades; aluminium and vanadium additions in Ti-6Al-4V (Grade 5) deliver 896 MPa tensile strength at 4.43 g/cm³ density.

Chemical Composition per ASTM B348 / F136

ElementComposition (%)
Titanium (Ti)Balance
Aluminium (Al)5.5-6.75
Vanadium (V)3.5-4.5
Iron (Fe)0.40 max
Oxygen (O)0.20 max
Carbon (C)0.08 max
Nitrogen (N)0.05 max
Hydrogen (H)0.015 max
Other Elements0.40 max (each 0.10)
? All heats verified by NABL-accredited spectrometry. PMI and interstitial analysis available on request.

Why Titanium Grade 5 (Ti-6Al-4V) Alloy Composition Matters for Screws

Al (6%) + V (4%) — Strength & Fatigue Resistance
The addition of aluminium and vanadium to titanium creates a dual-phase (alpha-beta) structure, delivering high tensile strength and superior fatigue resistance, essential for critical bolted joints in aerospace and racing applications.
Low Interstitials — Corrosion & Biocompatibility
Strict limits on oxygen, nitrogen, and hydrogen ensure excellent corrosion resistance in seawater, body fluids, and aggressive chemicals, making Ti-6Al-4V screws suitable for marine, chemical, and medical implant use.
No Magnetic Response
Titanium Grade 5 is non-magnetic and non-sparking, ideal for MRI-compatible medical devices and sensitive electronic assemblies.

Fastener Performance

Titanium Grade 5 (Ti-6Al-4V) Screws Mechanical Properties & Torque Reference

The table below lists mechanical properties and torque reference for Titanium Grade 5 (Ti-6Al-4V) Screws per ASTM. Titanium Grade 5 (Ti-6Al-4V) screws achieve 900 MPa tensile strength, with hardness, yield, and elongation values verified by NABL-accredited testing and reported in the EN 10204 MTC.

Screw SizeDry (Nm)Lubricated (Nm)Clamp Load (kN)
M611913
M8272221
M10544334
M12947549
M1623018498
M20450360153
M24780624221
?? Anti-galling: Use molybdenum-based or PTFE anti-seize. Lubricated values assume K=0.18. Titanium is prone to galling - always lubricate threads and underhead.

Industry Applications

Titanium Grade 5 (Ti-6Al-4V) Screws Applications — Industries & End Uses

Titanium Grade 5 (Ti-6Al-4V) Screws from RealBolt are specified across aerospace, marine, chemical processing, and medical devices where outstanding corrosion resistance and 900 MPa tensile strength are required for reliable fastener performance. Click each industry below for detailed application examples.
Titanium Grade 5 screws are the industry standard for airframe assembly, engine nacelles, landing gear, and control surfaces due to their high strength-to-weight ratio, fatigue resistance, and non-magnetic properties. Qualified to AMS 4928 and ISO 5832-3 for critical aerospace applications.
Socket head and countersunk screws for hull penetrations, deck hardware, underwater housings, and propeller assemblies where long-term seawater corrosion resistance and weight savings are essential. Used in racing yachts, naval vessels, and offshore platforms.
Ti-6Al-4V screws are widely used in orthopedic implants, trauma plates, dental fixtures, and surgical instruments. ASTM F136 and ISO 5832-3 certified for biocompatibility, MRI compatibility, and corrosion resistance in body fluids.
Titanium Grade 5 screws are specified for suspension, brake, and engine assemblies in Formula 1, MotoGP, and aerospace-derived automotive applications where every gram counts and reliability under vibration is critical.

Titanium Grade 5 (Ti-6Al-4V) Screws Standards & International Certifications

Titanium Grade 5 (Ti-6Al-4V) Screws from RealBolt Engineering Industries are manufactured to internationally recognised fastener dimensional standards covering thread form, tolerances, strength grades, and quality requirements. Every batch ships with EN 10204 MTC 3.1/3.2, AMS material certification, AS 9100D traceability for aerospace grades, and NABL lab reports — available on request for all orders.
Standards
DIN 912 DIN 913 DIN 914 DIN 915 DIN 916 DIN 6912 ISO 4762 ISO 10642 ISO 14579 ASME B18.3 EN ISO 4762 IS 1367
Certifications
ISO 9001:2015PED 2014/68/EUNABL LabMTC 3.1 / 3.2CE Marking

Buy Titanium Grade 5 (Ti-6Al-4V) Screws from India's Leading Manufacturer — Get a Competitive Quote Today

Partner with RealBolt — India’s leading manufacturer of certified Titanium Grade 5 (Ti-6Al-4V) Screws — for competitive pricing, EN 10204 MTC 3.1/3.2 documentation, and fast Mumbai dispatch. Standard sizes are ex-stock; custom dimensions accepted with 2–3 week lead time. Request your quote today.
022-6743-7972
+91 90226 36025
Email Us

Answers for Buyers

Titanium Grade 5 (Ti-6Al-4V) Screws — Frequently Asked Questions

Browse expert answers to common questions about Titanium Grade 5 (Ti-6Al-4V) Screws from RealBolt — covering grade selection, ASTM B348/F467, seawater immunity, weight saving, galling precautions, and certification. Contact our technical team directly for project-specific guidance on Titanium Grade 5 (Ti-6Al-4V) screws selection and pricing.
Titanium Grade 5 screws are available to DIN 912 (socket head cap), DIN 7991 (countersunk), ISO 4762 (hex socket), ISO 7380 (button head), and ASME B18.3 (inch socket). Custom thread forms (UNC, UNF, BSW, Whitworth) and special lengths are available on request with a typical lead time of 2-3 weeks.
Always use a suitable anti-seize lubricant (molybdenum disulfide, PTFE, or graphite-based) on threads and under the screw head. Titanium is prone to galling, especially in dry or high-load applications. Avoid over-torquing and use controlled tightening methods for best results.
Yes – Ti-6Al-4V screws offer outstanding resistance to seawater, chlorides, and body fluids. They are non-magnetic, biocompatible, and certified to ASTM F136 and ISO 5832-3 for medical implants and surgical devices. No additional coating is required for marine or medical use.
No MOQ for standard metric and inch sizes held in stock – we supply from single pieces for urgent requirements. Custom sizes, medical, or aerospace-certified screws may have a 10-20 piece MOQ. Quantity discounts apply at 50, 200, and 500 pieces.

Industrial Cities We Serve:

  • Ahmedabad
  • Aurangabad
  • Bengaluru
  • Chennai
  • Coimbatore
  • Faridabad
  • Gandhidham
  • Greater Noida
  • Gurugram
  • Hazira
  • Hosur
  • Hyderabad
  • Jamnagar
  • Jamshedpur
  • Ludhiana
  • Mumbai
  • Mundra
  • Mysuru
  • Nagpur
  • Nashik
  • Navi Mumbai
  • Noida
  • Pune
  • Rajkot
  • Sanand
  • Surat
  • Thane
  • Tiruppur
  • Vadodara
  • Visakhapatnam

Countries We Export To:

  • US
  • Canada
  • Mexico
  • Germany
  • UK
  • France
  • Italy
  • Spain
  • Netherlands
  • Belgium
  • Poland
  • Sweden
  • Norway
  • Denmark
  • Turkey
  • UAE
  • Saudi Arabia
  • Qatar
  • Oman
  • Kuwait
  • Bahrain
  • South Africa
  • Egypt
  • Nigeria
  • Australia
  • New Zealand
  • Singapore
  • Malaysia
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Brazil