+912267437972

+919022636025

enquiry@real-bolt.com

Contact Us

Titanium Grade 5 (Ti-6Al-4V) Washers Manufacturer & Exporter in India

Explore Titanium Grade 5 (Ti-6Al-4V) Washers Manufacturer & Exporter in India manufactured for demanding industrial applications with reliable strength, corrosion resistance and compliance with international standards.
Request a Quote
View Products

-250

Min Temp

600

Max Temp

🌡

600

Suitable for continuous service up to approximately 600°C under typical operating conditions.

⚡

900

Typical tensile strength around 900 MPa depending on product form and heat treatment.

🛡

Outstanding

Outstanding corrosion resistance in a wide range of industrial environments.

⚖

4.5

Typical density is approximately 4.5 g/cm³.

Product Overview

What are Titanium Grade 5 (Ti-6Al-4V) Washers?

Titanium Grade 5 (Ti-6Al-4V) washers are high-performance fastener components manufactured from the most widely used titanium alloy, UNS R56400, conforming to ASTM B348 and ASTM F136. This alpha-beta alloy contains 6% aluminium and 4% vanadium, providing an exceptional combination of strength, low density, and outstanding corrosion resistance in both oxidizing and chloride-rich environments.

Grade 5 titanium washers are specified for critical bolted joints in aerospace, offshore, chemical, and medical applications where weight reduction, high fatigue strength, and non-magnetic properties are essential. They are available in flat, spring, and custom geometries, and are suitable for use with both titanium and dissimilar alloy fasteners.

Quick Specifications

MaterialTitanium Grade 5 (Ti-6Al-4V)
UNS NumberR56400
DIN Number3.7165
Material StandardASTM B348 / ASTM F136
Washer Standard (Metric)DIN 125 / DIN 127 / ISO 7089
Washer Standard (Inch)ASME B18.22.1
TypeFlat, Spring, Belleville, Tab, Custom
Size RangeM3-M64 / 1/8"-2½"
Tensile Strength895 MPa (130 ksi) min
Yield Strength828 MPa (120 ksi) min
HardnessMax 36 HRC / 349 HV
? All washers supplied with full traceability and PMI certification. Custom sizes available on request.

Complete the Fastener Set

Other Titanium Grade 5 (Ti-6Al-4V) Fastener Products Available from RealBolt

RealBolt also manufactures the complete Titanium Grade 5 (Ti-6Al-4V) fastener range — Titanium Grade 5 (Ti-6Al-4V) Bolts, Titanium Grade 5 (Ti-6Al-4V) Nuts, Titanium Grade 5 (Ti-6Al-4V) Screws, Titanium Grade 5 (Ti-6Al-4V) Studs, Titanium Grade 5 (Ti-6Al-4V) Threaded Rods — from certified bar stock per ASTM with full EN 10204 MTC 3.1/3.2 documentation and fast Mumbai dispatch.
Titanium Grade 5 (Ti-6Al-4V) Bolts
Titanium Grade 5 (Ti-6Al-4V) Nuts
Titanium Grade 5 (Ti-6Al-4V) Screws
Titanium Grade 5 (Ti-6Al-4V) Studs
Titanium Grade 5 (Ti-6Al-4V) Threaded Rods

Technical Data

Titanium Grade 5 (Ti-6Al-4V) Washers Dimensions, Sizes & Thread Standards

Titanium Grade 5 (Ti-6Al-4V) Washers are available in metric M6–M100 and inch ¼″–4″ as standard. Manufactured to DIN 125 (flat), DIN 127 (spring), ISO 7089, and ASME B18.22.1. Custom OD/ID and thicknesses available. Metric and inch sizes supplied. All Titanium Grade 5 (Ti-6Al-4V) washers dimensions conform to applicable DIN, ISO, and ASME B18 standards.

Flat Washer Dimensions - Metric (DIN 125 / ISO 7089)

Size (M)Inner Dia (mm)Outer Dia (mm)Thickness (mm)
M33.270.5
M66.4121.6
M88.4161.6
M1010.5202.0
M1213.0242.5
M1617.0303.0
M2021.0373.0
M2425.0444.0
M3031.0564.0
M3637.0665.0
M4243.0786.0
M4849.0926.0
M5657.01058.0
M6465.01158.0

Dimensional & Material Standards

StandardCoversType
DIN 125Flat washersMetric
DIN 127Spring lock washersMetric
ISO 7089Plain washersMetric
ASME B18.22.1Plain & lock washersInch
ISO 8738Tab washersMetric
Material StandardRequirement
ASTM B348Bar/rod/plate - Ti-6Al-4V
ASTM F136Medical implant grade
AMS 4928Aerospace bar/forgings
EN 10204 3.1Mill test certificate
EN 10204 3.2TPI-witnessed MTC

Material Chemistry

Titanium Grade 5 Chemical Composition

Titanium Grade 5 (Ti-6Al-4V) Washers are manufactured from commercially pure or alloyed titanium with elemental limits strictly controlled per ASTM and AMS specifications. Oxygen and nitrogen contents govern strength and ductility in CP grades; aluminium and vanadium additions in Ti-6Al-4V (Grade 5) deliver 896 MPa tensile strength at 4.43 g/cm³ density.

Chemical Composition per ASTM B348 / F136

ElementComposition (%)
Titanium (Ti)Balance
Aluminium (Al)5.5-6.75
Vanadium (V)3.5-4.5
Iron (Fe)0.40 max
Oxygen (O)0.20 max
Carbon (C)0.08 max
Nitrogen (N)0.05 max
Hydrogen (H)0.015 max
Other Elements0.40 max (each 0.10)
? All heats spectrographically verified. Full PMI and batch traceability provided.

Why Titanium Grade 5 (Ti-6Al-4V) Alloy Composition Matters for Washers

Al (6%) + V (4%) — Strength & Fatigue Resistance
The addition of aluminium and vanadium to titanium creates an alloy with high tensile and yield strength, making Grade 5 washers ideal for high-load, vibration-prone bolted joints in aerospace and motorsport assemblies.
Low Interstitials — Corrosion & Biocompatibility
Strict limits on oxygen, nitrogen, and carbon ensure excellent corrosion resistance in seawater, chlorides, and body fluids, making these washers suitable for marine, chemical, and medical implant use.
Non-Magnetic & Lightweight
Grade 5 titanium washers are non-magnetic and 45% lighter than steel, reducing rotating mass and eliminating magnetic interference in sensitive equipment.

Fastener Performance

Titanium Grade 5 (Ti-6Al-4V) Washers Mechanical Properties & Torque Reference

The table below lists mechanical properties and torque reference for Titanium Grade 5 (Ti-6Al-4V) Washers per ASTM. Titanium Grade 5 (Ti-6Al-4V) washers achieve 900 MPa tensile strength, with hardness, yield, and elongation values verified by NABL-accredited testing and reported in the EN 10204 MTC.

Bolt SizeRecommended Washer OD (mm)Recommended Thickness (mm)
M6121.6
M8161.6
M10202.0
M12242.5
M16303.0
M20373.0
M24444.0
M30564.0
?? Installation: Use with Ti-6Al-4V or compatible fasteners. For critical joints, consult engineering for washer thickness and preload requirements.

Industry Applications

Titanium Grade 5 (Ti-6Al-4V) Washers Applications — Industries & End Uses

Titanium Grade 5 (Ti-6Al-4V) Washers from RealBolt are specified across aerospace, marine, chemical processing, and medical devices where outstanding corrosion resistance and 900 MPa tensile strength are required for reliable fastener performance. Click each industry below for detailed application examples.
Flat and spring washers for aircraft structural assemblies, engine mounts, and landing gear where high strength-to-weight ratio and fatigue resistance are critical. AMS 4928 and ASTM F136 compliant for airframe and engine use.
Washers for subsea bolted joints, offshore platform equipment, and yacht hardware. Grade 5 titanium resists crevice and pitting corrosion in seawater, making it ideal for splash zone and submerged applications.
Washers for bolted flanges, pumps, and reactor closures in chloride, acid, and oxidizing environments. Grade 5 titanium provides superior corrosion resistance where stainless steel fails.
ASTM F136 washers for orthopedic implants, surgical instruments, and dental assemblies. Biocompatible and non-magnetic, suitable for MRI environments and long-term implantation.

Titanium Grade 5 (Ti-6Al-4V) Washers Standards & International Certifications

Titanium Grade 5 (Ti-6Al-4V) Washers from RealBolt Engineering Industries are manufactured to internationally recognised fastener dimensional standards covering thread form, tolerances, strength grades, and quality requirements. Every batch ships with EN 10204 MTC 3.1/3.2, AMS material certification, AS 9100D traceability for aerospace grades, and NABL lab reports — available on request for all orders.
Standards
DIN 125A DIN 127 ISO 7089 ISO 7090 ASME B18.21.1 IS 1367
Certifications
ISO 9001:2015PED 2014/68/EUNABL LabEN 10204 3.1 / 3.2CE Marking

Buy Titanium Grade 5 (Ti-6Al-4V) Washers from India's Leading Manufacturer — Get a Competitive Quote Today

Partner with RealBolt — India’s leading manufacturer of certified Titanium Grade 5 (Ti-6Al-4V) Washers — for competitive pricing, EN 10204 MTC 3.1/3.2 documentation, and fast Mumbai dispatch. Standard sizes are ex-stock; custom dimensions accepted with 2–3 week lead time. Request your quote today.
022-6743-7972
+91 90226 36025
Email Us

Answers for Buyers

Titanium Grade 5 (Ti-6Al-4V) Washers — Frequently Asked Questions

Browse expert answers to common questions about Titanium Grade 5 (Ti-6Al-4V) Washers from RealBolt — covering grade selection, ASTM B348/F467, seawater immunity, weight saving, galling precautions, and certification. Contact our technical team directly for project-specific guidance on Titanium Grade 5 (Ti-6Al-4V) washers selection and pricing.
Titanium Grade 5 washers are available to DIN 125 (flat), DIN 127 (spring), ISO 7089, ISO 8738 (tab), and ASME B18.22.1 (inch). Medical washers are supplied to ASTM F136, and aerospace washers to AMS 4928. Custom geometries and tolerances can be produced to drawing within 2-3 weeks.
Yes, Grade 5 titanium washers can be used with stainless steel bolts, but galvanic corrosion should be considered in wet or marine environments. For critical applications, use with titanium or compatible alloy fasteners, or apply an insulating coating to prevent galvanic coupling.
Absolutely. Ti-6Al-4V washers are highly resistant to pitting, crevice, and stress corrosion in seawater, making them ideal for offshore, marine, and subsea bolted joints. They are widely specified for splash zone and submerged hardware on platforms and vessels.
Standard metric and inch sizes (M6-M24) are available ex-stock with no MOQ-single pieces can be supplied for urgent needs. Custom sizes or special geometries typically require a 5 kg minimum batch. Price breaks are available at 50, 200, and 500 pieces.

Industrial Cities We Serve:

  • Ahmedabad
  • Aurangabad
  • Bengaluru
  • Chennai
  • Coimbatore
  • Faridabad
  • Gandhidham
  • Greater Noida
  • Gurugram
  • Hazira
  • Hosur
  • Hyderabad
  • Jamnagar
  • Jamshedpur
  • Ludhiana
  • Mumbai
  • Mundra
  • Mysuru
  • Nagpur
  • Nashik
  • Navi Mumbai
  • Noida
  • Pune
  • Rajkot
  • Sanand
  • Surat
  • Thane
  • Tiruppur
  • Vadodara
  • Visakhapatnam

Countries We Export To:

  • US
  • Canada
  • Mexico
  • Germany
  • UK
  • France
  • Italy
  • Spain
  • Netherlands
  • Belgium
  • Poland
  • Sweden
  • Norway
  • Denmark
  • Turkey
  • UAE
  • Saudi Arabia
  • Qatar
  • Oman
  • Kuwait
  • Bahrain
  • South Africa
  • Egypt
  • Nigeria
  • Australia
  • New Zealand
  • Singapore
  • Malaysia
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Brazil