+912267437972

+919022636025

enquiry@real-bolt.com

Contact Us

Titanium Grade 5 (Ti-6Al-4V) Studs Manufacturer & Exporter in India

Explore Titanium Grade 5 (Ti-6Al-4V) Studs Manufacturer & Exporter in India manufactured for demanding industrial applications with reliable strength, corrosion resistance and compliance with international standards.
Request a Quote
View Products

-250

Min Temp

600

Max Temp

🌡

600

Suitable for continuous service up to approximately 600°C under typical operating conditions.

⚡

900

Typical tensile strength around 900 MPa depending on product form and heat treatment.

🛡

Outstanding

Outstanding corrosion resistance in a wide range of industrial environments.

⚖

4.5

Typical density is approximately 4.5 g/cm³.

Product Overview

What are Titanium Grade 5 (Ti-6Al-4V) Studs?

Titanium Grade 5 (Ti-6Al-4V) studs are high-strength, lightweight threaded rods manufactured from the alpha-beta titanium alloy UNS R56400, conforming to ASTM B348 and ASTM F468 standards. With a nominal composition of 6% aluminium and 4% vanadium, these studs deliver exceptional mechanical properties, including a minimum tensile strength of 895 MPa and outstanding corrosion resistance in both oxidizing and chloride-rich environments.

Ti-6Al-4V studs are widely specified for critical bolted joints in aerospace, offshore, chemical processing, and medical equipment, where weight reduction, biocompatibility, and resistance to extreme temperatures are essential. Their non-magnetic and non-galling characteristics make them ideal for demanding engineering applications.

Quick Specifications

MaterialTitanium Grade 5 (Ti-6Al-4V)
UNS NumberR56400
DIN Number3.7165
Material StandardASTM B348 / ASTM F468
Stud Standard (Metric)DIN 976 / ISO 898-1
Stud Standard (Inch)ASME B16.5 / ASME B18.31.2
Thread FormISO Metric / UNC / UNF
Diameter RangeM6-M64 / ¼"-2½"
Tensile Strength895 MPa (130 ksi) min
Yield Strength828 MPa (120 ksi) min
HardnessMax 36 HRC / 349 HV
? All material certified by NABL-accredited laboratory. PMI and ultrasonic testing available on request.

Complete the Fastener Set

Other Titanium Grade 5 (Ti-6Al-4V) Fastener Products Available from RealBolt

RealBolt also manufactures the complete Titanium Grade 5 (Ti-6Al-4V) fastener range — Titanium Grade 5 (Ti-6Al-4V) Bolts, Titanium Grade 5 (Ti-6Al-4V) Nuts, Titanium Grade 5 (Ti-6Al-4V) Screws, Titanium Grade 5 (Ti-6Al-4V) Washers, Titanium Grade 5 (Ti-6Al-4V) Threaded Rods — from certified bar stock per ASTM with full EN 10204 MTC 3.1/3.2 documentation and fast Mumbai dispatch.
Titanium Grade 5 (Ti-6Al-4V) Bolts
Titanium Grade 5 (Ti-6Al-4V) Nuts
Titanium Grade 5 (Ti-6Al-4V) Screws
Titanium Grade 5 (Ti-6Al-4V) Washers
Titanium Grade 5 (Ti-6Al-4V) Threaded Rods

Technical Data

Titanium Grade 5 (Ti-6Al-4V) Studs Dimensions, Sizes & Thread Standards

Titanium Grade 5 (Ti-6Al-4V) Studs are available in metric M6–M100 and inch ¼″–4″ as standard. Per DIN 976 (metric), ASME B16.5 (inch), and ISO 898-1. Custom lengths available in 5mm increments. Inch dimensions per ASME B18.31.2. All Titanium Grade 5 (Ti-6Al-4V) studs dimensions are verified against applicable DIN, ISO, and

Stud Dimensions - Metric (DIN 976)

Size (M)Pitch (mm)Thread Length (mm)Min L (mm)Max L (mm)
M61.01820200
M81.252225250
M101.52630300
M121.753035400
M162.03840500
M202.54450600
M243.05460800
M303.566701000
M364.078801200
M424.5901001500
M485.01021201800
M565.51141402000
M646.01261602500

Dimensional & Material Standards

StandardCoversThread
DIN 976Threaded rods & studsMetric
ISO 898-1Mechanical propertiesMetric
ASME B16.5Stud bolts for flangesUNC
ASME B18.31.2Continuous threaded rodsUNC/UNF
ISO 261General metric threadsMetric
Material StandardRequirement
ASTM B348Bar/rod - UNS R56400
ASTM F468Fastener mechanical
AMS 4928Aerospace bar/rod
EN 10204 3.1Mill test certificate
EN 10204 3.2TPI-witnessed MTC

Material Chemistry

Titanium Grade 5 Chemical Composition

Titanium Grade 5 (Ti-6Al-4V) Studs are manufactured from commercially pure or alloyed titanium with elemental limits strictly controlled per ASTM and AMS specifications. Oxygen and nitrogen contents govern strength and ductility in CP grades; aluminium and vanadium additions in Ti-6Al-4V (Grade 5) deliver 896 MPa tensile strength at 4.43 g/cm³ density.

Chemical Composition per ASTM B348

ElementComposition (%)
Titanium (Ti)Balance
Aluminium (Al)5.5-6.75
Vanadium (V)3.5-4.5
Iron (Fe)0.40 max
Oxygen (O)0.20 max
Carbon (C)0.08 max
Nitrogen (N)0.05 max
Hydrogen (H)0.015 max
Other Elements0.40 max (each 0.10)
? All heats verified by NABL-accredited spectrometry. PMI and gas analysis available on request.

Why Titanium Grade 5 (Ti-6Al-4V) Alloy Composition Matters for Studs

Al (6%) + V (4%) — Strength & Creep Resistance
The addition of aluminium and vanadium to titanium creates a dual-phase alloy with high tensile and yield strength, excellent fatigue resistance, and stability at elevated temperatures, making Ti-6Al-4V studs ideal for critical bolted joints.
Low Interstitials — Ductility & Weldability
Strict limits on oxygen, nitrogen, and hydrogen ensure high ductility and prevent embrittlement, allowing studs to be welded or hot-forged without loss of mechanical properties.
Corrosion Resistance — Chloride & Oxidizing Media
Titanium Grade 5 forms a stable oxide film, providing outstanding resistance to seawater, chlorides, and oxidizing acids, ensuring long-term performance in marine and chemical environments.

Fastener Performance

Titanium Grade 5 (Ti-6Al-4V) Studs Mechanical Properties & Torque Reference

The table below lists mechanical properties and torque reference for Titanium Grade 5 (Ti-6Al-4V) Studs per ASTM. Titanium Grade 5 (Ti-6Al-4V) studs achieve 900 MPa tensile strength, with hardness, yield, and elongation values verified by NABL-accredited testing and reported in the EN 10204 MTC.

Stud SizeDry (Nm)Lubricated (Nm)Clamp Load (kN)
M12705632
M1617013677
M20340272123
M24590472178
M301200960283
M3621001680411
M4234002720566
M4851004080744
?? Anti-galling: Use molybdenum-based or PTFE anti-seize. Lubricated values assume K=0.16. Never use copper-based anti-seize on titanium alloys due to galvanic corrosion risk.

Industry Applications

Titanium Grade 5 (Ti-6Al-4V) Studs Applications — Industries & End Uses

Titanium Grade 5 (Ti-6Al-4V) Studs from RealBolt are specified across aerospace, marine, chemical processing, and medical devices where outstanding corrosion resistance and 900 MPa tensile strength are required for reliable fastener performance. Click each industry below for detailed application examples.
Titanium Grade 5 studs are the industry standard for aerospace engine mounts, airframe assemblies, and satellite structures where high strength-to-weight ratio, fatigue resistance, and non-magnetic properties are critical. Qualified to AMS 4928 and ASTM F468.
Stud bolts for subsea pipeline flanges, riser connections, and marine structural joints where resistance to seawater, chlorides, and biofouling is essential. Titanium Grade 5 is specified for long-term immersion and splash zone hardware.
Used in heat exchanger channel covers, reactor closures, and desalination plant piping where resistance to oxidizing acids, chlorides, and brine is required. Outperforms stainless steel in aggressive chemical environments.
Threaded rods and studs for surgical instruments, orthopedic implants, and MRI-compatible assemblies due to biocompatibility, non-magnetic nature, and corrosion resistance. Supplied with ISO 13485 certification on request.

Titanium Grade 5 (Ti-6Al-4V) Studs Standards & International Certifications

Titanium Grade 5 (Ti-6Al-4V) Studs from RealBolt Engineering Industries are manufactured to internationally recognised fastener dimensional standards covering thread form, tolerances, strength grades, and quality requirements. Every batch ships with EN 10204 MTC 3.1/3.2, AMS material certification, AS 9100D traceability for aerospace grades, and NABL lab reports — available on request for all orders.
Standards
DIN 938 DIN 939 DIN 976-1 ASME B18.31.2 IS 1367
Certifications
ISO 9001:2015ISO 13485NABL LabPED 2014/68/EUMTC 3.1 / 3.2

Buy Titanium Grade 5 (Ti-6Al-4V) Studs from India's Leading Manufacturer — Get a Competitive Quote Today

Partner with RealBolt — India’s leading manufacturer of certified Titanium Grade 5 (Ti-6Al-4V) Studs — for competitive pricing, EN 10204 MTC 3.1/3.2 documentation, and fast Mumbai dispatch. Standard sizes are ex-stock; custom dimensions accepted with 2–3 week lead time. Request your quote today.
022-6743-7972
+91 90226 36025
Email Us

Answers for Buyers

Titanium Grade 5 (Ti-6Al-4V) Studs — Frequently Asked Questions

Browse expert answers to common questions about Titanium Grade 5 (Ti-6Al-4V) Studs from RealBolt — covering grade selection, ASTM B348/F467, seawater immunity, weight saving, galling precautions, and certification. Contact our technical team directly for project-specific guidance on Titanium Grade 5 (Ti-6Al-4V) studs selection and pricing.
Titanium Grade 5 studs are available to DIN 976 (metric threaded rods), ASME B16.5 (flange stud bolts), ISO 898-1 (mechanical properties), and ASME B18.31.2 (inch continuous threaded rods). Custom thread forms (BSW, BSF, Whitworth, BSPP) can be supplied on request with a typical lead time of 2-3 weeks.
Use molybdenum-based or PTFE anti-seize compound (such as Molykote 1000 or Loctite LB 8014) on threads and nut faces. Avoid copper-based or zinc-based anti-seize, as these can cause galvanic corrosion with titanium. Lubricated torque values should be reduced by 20% compared to dry assembly.
Yes – Titanium Grade 5 (Ti-6Al-4V) is completely resistant to corrosion in seawater, brine, and marine atmospheres, including under crevice and biofouling conditions. It is specified for offshore, desalination, and shipbuilding applications where stainless steel is prone to pitting.
No formal MOQ for standard metric sizes (M8-M36) held in stock – single pieces can be supplied for urgent requirements. Custom sizes or inch threads typically require a 5 kg minimum. Flange stud bolt sets are supplied per set with no minimum. Price breaks at 25, 100, and 500 pieces.

Industrial Cities We Serve:

  • Ahmedabad
  • Aurangabad
  • Bengaluru
  • Chennai
  • Coimbatore
  • Faridabad
  • Gandhidham
  • Greater Noida
  • Gurugram
  • Hazira
  • Hosur
  • Hyderabad
  • Jamnagar
  • Jamshedpur
  • Ludhiana
  • Mumbai
  • Mundra
  • Mysuru
  • Nagpur
  • Nashik
  • Navi Mumbai
  • Noida
  • Pune
  • Rajkot
  • Sanand
  • Surat
  • Thane
  • Tiruppur
  • Vadodara
  • Visakhapatnam

Countries We Export To:

  • US
  • Canada
  • Mexico
  • Germany
  • UK
  • France
  • Italy
  • Spain
  • Netherlands
  • Belgium
  • Poland
  • Sweden
  • Norway
  • Denmark
  • Turkey
  • UAE
  • Saudi Arabia
  • Qatar
  • Oman
  • Kuwait
  • Bahrain
  • South Africa
  • Egypt
  • Nigeria
  • Australia
  • New Zealand
  • Singapore
  • Malaysia
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Brazil