+912267437972

+919022636025

enquiry@real-bolt.com

Contact Us

Titanium Grade 5 (Ti-6Al-4V) Threaded Rods Manufacturer & Exporter in India

Explore Titanium Grade 5 (Ti-6Al-4V) Threaded Rods Manufacturer & Exporter in India manufactured for demanding industrial applications with reliable strength, corrosion resistance and compliance with international standards.
Request a Quote
View Products

-250

Min Temp

600

Max Temp

🌡

600

Suitable for continuous service up to approximately 600°C under typical operating conditions.

⚡

900

Typical tensile strength around 900 MPa depending on product form and heat treatment.

🛡

Outstanding

Outstanding corrosion resistance in a wide range of industrial environments.

⚖

4.5

Typical density is approximately 4.5 g/cm³.

Product Overview

What are Titanium Grade 5 (Ti-6Al-4V) Threaded Rods?

Titanium Grade 5 (Ti-6Al-4V) threaded rods are high-strength, lightweight fasteners manufactured from the most widely used titanium alloy, UNS R56400. This alpha-beta alloy contains 6% aluminium and 4% vanadium, providing an exceptional balance of strength, corrosion resistance, and low density. Threaded rods in Ti-6Al-4V are specified for critical bolted joints where weight savings and resistance to extreme environments are essential.

Conforming to ASTM B348 and ASTM F468, Titanium Grade 5 threaded rods are used in aerospace, offshore, chemical, and medical applications. Their high tensile strength (895 MPa min) and outstanding resistance to seawater, chlorides, and oxidizing acids make them ideal for demanding structural and flange connections.

Quick Specifications

MaterialTitanium Grade 5 (Ti-6Al-4V)
UNS NumberR56400
DIN Number3.7165
Material StandardASTM B348
Rod Standard (Metric)DIN 976 / ISO 898-1
Rod Standard (Inch)ASME B18.31.3
Thread FormISO Metric / UNC / UNF
Diameter RangeM6-M64 / ¼"-2½"
Tensile Strength895 MPa (130 ksi) min
Yield Strength828 MPa (120 ksi) min
HardnessMax 36 HRC / 349 HB
? All material certified by NABL-accredited laboratory. PMI and ultrasonic testing available on request.

Complete the Fastener Set

Other Titanium Grade 5 (Ti-6Al-4V) Fastener Products Available from RealBolt

RealBolt also manufactures the complete Titanium Grade 5 (Ti-6Al-4V) fastener range — Titanium Grade 5 (Ti-6Al-4V) Bolts, Titanium Grade 5 (Ti-6Al-4V) Nuts, Titanium Grade 5 (Ti-6Al-4V) Screws, Titanium Grade 5 (Ti-6Al-4V) Washers, Titanium Grade 5 (Ti-6Al-4V) Studs — from certified bar stock per ASTM with full EN 10204 MTC 3.1/3.2 documentation and fast Mumbai dispatch.
Titanium Grade 5 (Ti-6Al-4V) Bolts
Titanium Grade 5 (Ti-6Al-4V) Nuts
Titanium Grade 5 (Ti-6Al-4V) Screws
Titanium Grade 5 (Ti-6Al-4V) Washers
Titanium Grade 5 (Ti-6Al-4V) Studs

Technical Data

Titanium Grade 5 (Ti-6Al-4V) Threaded Rods Dimensions, Sizes & Thread Standards

Titanium Grade 5 (Ti-6Al-4V) Threaded Rods are available in metric M6–M100 and inch ¼″–4″ as standard. Per DIN 976 (metric all thread rods) and ASME B18.31.3 (inch). Custom cut lengths available in 5mm increments. Special threads and tolerances on request.

Threaded Rod Dimensions - Metric (DIN 976)

Size (M)Pitch (mm)Rod Dia (mm)Min L (mm)Max L (mm)
M61.06.0202000
M81.258.0202000
M101.510.0302000
M121.7512.0302000
M162.016.0402000
M202.520.0502000
M243.024.0602000
M303.530.0802000
M364.036.01002000
M424.542.01202000
M485.048.01402000
M565.556.01602000
M646.064.01802000

Dimensional & Material Standards

StandardCoversThread
DIN 976Threaded rods, all threadMetric
ISO 898-1Mechanical propertiesMetric
ASME B18.31.3Continuous thread rodsUNC/UNF
ASTM F468Fastener mechanicalUNC/UNF/Metric
ISO 261General purpose threadsMetric
Material StandardRequirement
ASTM B348Bar/rod - Ti-6Al-4V
ASTM F468Fastener mechanical
AMS 4928Aerospace rod
EN 10204 3.1Mill test certificate
EN 10204 3.2TPI-witnessed MTC

Material Chemistry

Titanium Grade 5 Chemical Composition

Titanium Grade 5 (Ti-6Al-4V) Threaded Rods are manufactured from commercially pure or alloyed titanium with elemental limits strictly controlled per ASTM and AMS specifications. Oxygen and nitrogen contents govern strength and ductility in CP grades; aluminium and vanadium additions in Ti-6Al-4V (Grade 5) deliver 896 MPa tensile strength at 4.43 g/cm³ density.

Chemical Composition per ASTM B348

ElementComposition (%)
Titanium (Ti)Balance
Aluminium (Al)5.5-6.75
Vanadium (V)3.5-4.5
Iron (Fe)0.40 max
Oxygen (O)0.20 max
Carbon (C)0.08 max
Nitrogen (N)0.05 max
Hydrogen (H)0.015 max
Other Elements0.40 max (each 0.10)
? All heats verified by NABL-accredited spectrometry. PMI and interstitial analysis available on request.

Why Titanium Grade 5 (Ti-6Al-4V) Alloy Composition Matters for Threaded Rods

Al (6%) + V (4%) — Strength & Fatigue Resistance
The 6% aluminium and 4% vanadium content in Ti-6Al-4V delivers high tensile and yield strength, making these threaded rods suitable for high-load, weight-sensitive bolted joints in aerospace and offshore structures.
Low Interstitials — Ductility & Weldability
Strict limits on oxygen, nitrogen, and hydrogen ensure excellent ductility and weldability, allowing rods to be cut, machined, and welded without embrittlement or loss of mechanical properties.
Corrosion Resistance — Chlorides & Seawater
Titanium Grade 5’s composition provides outstanding resistance to seawater, chlorides, and oxidizing acids, making these rods ideal for marine, chemical, and desalination plant applications.

Fastener Performance

Titanium Grade 5 (Ti-6Al-4V) Threaded Rods Mechanical Properties & Torque Reference

The table below lists mechanical properties and torque reference for Titanium Grade 5 (Ti-6Al-4V) Threaded Rods per ASTM. Titanium Grade 5 (Ti-6Al-4V) threaded rods achieve 900 MPa tensile strength, with hardness, yield, and elongation values verified by NABL-accredited testing and reported in the EN 10204 MTC.

Rod SizeDry (Nm)Lubricated (Nm)Clamp Load (kN)
M12705628
M1617013656
M2034027288
M24590472127
M301200960205
M3621001680295
M4233002640410
M4848003840550
?? Anti-galling: Use molybdenum disulfide or PTFE-based anti-seize. Lubricated values assume K=0.16. Avoid copper-based anti-seize to prevent galvanic corrosion with titanium.

Industry Applications

Titanium Grade 5 (Ti-6Al-4V) Threaded Rods Applications — Industries & End Uses

Titanium Grade 5 (Ti-6Al-4V) Threaded Rods from RealBolt are specified across aerospace, marine, chemical processing, and medical devices where outstanding corrosion resistance and 900 MPa tensile strength are required for reliable fastener performance. Click each industry below for detailed application examples.
Titanium Grade 5 threaded rods are the industry standard for aerospace structural joints, satellite frames, and engine mounts where high strength-to-weight ratio and fatigue resistance are critical. AMS 4928 and ASTM F468 compliant for flight hardware.
Used for bolted joints in offshore platforms, riser clamps, and marine equipment exposed to seawater and brine. Ti-6Al-4V rods provide long-term corrosion resistance and weight savings over stainless steel in splash zones and submerged assemblies.
Threaded rods for chemical reactor closures, heat exchanger tie rods, and desalination plant piping supports where resistance to chlorides, acids, and oxidizing media is required. Outperforms SS 316L in aggressive process environments.
Specified for medical device frames, cleanroom supports, and pharmaceutical process equipment due to biocompatibility, non-magnetic properties, and resistance to sterilization chemicals.

Titanium Grade 5 (Ti-6Al-4V) Threaded Rods Standards & International Certifications

Titanium Grade 5 (Ti-6Al-4V) Threaded Rods from RealBolt Engineering Industries are manufactured to internationally recognised fastener dimensional standards covering thread form, tolerances, strength grades, and quality requirements. Every batch ships with EN 10204 MTC 3.1/3.2, AMS material certification, AS 9100D traceability for aerospace grades, and NABL lab reports — available on request for all orders.
Standards
DIN 975 DIN 976-1 ASME B18.31.2 IS 1367
Certifications
ISO 9001:2015PED 2014/68/EUNABL LabMTC 3.1 / 3.2

Buy Titanium Grade 5 (Ti-6Al-4V) Threaded Rods from India's Leading Manufacturer — Get a Competitive Quote Today

Partner with RealBolt — India’s leading manufacturer of certified Titanium Grade 5 (Ti-6Al-4V) Threaded Rods — for competitive pricing, EN 10204 MTC 3.1/3.2 documentation, and fast Mumbai dispatch. Standard sizes are ex-stock; custom dimensions accepted with 2–3 week lead time. Request your quote today.
022-6743-7972
+91 90226 36025
Email Us

Answers for Buyers

Titanium Grade 5 (Ti-6Al-4V) Threaded Rods — Frequently Asked Questions

Browse expert answers to common questions about Titanium Grade 5 (Ti-6Al-4V) Threaded Rods from RealBolt — covering grade selection, ASTM B348/F467, seawater immunity, weight saving, galling precautions, and certification. Contact our technical team directly for project-specific guidance on Titanium Grade 5 (Ti-6Al-4V) threaded rods selection and pricing.
Titanium Grade 5 threaded rods are available to DIN 976 (metric all thread), ASME B18.31.3 (inch), and ISO 261/965 (metric coarse/fine). Custom threads (UNC, UNF, BSW, BSF) and special tolerances can be supplied on request with a typical lead time of 2-3 weeks.
Use molybdenum disulfide (MoS2) or PTFE-based anti-seize on Titanium Grade 5 rods. Avoid copper-based or graphite-based compounds to prevent galvanic corrosion. Apply to threads and nut faces to reduce galling and ensure consistent preload.
Yes – Ti-6Al-4V threaded rods are highly resistant to seawater, brine, and marine atmospheres, making them ideal for offshore, shipbuilding, and desalination plant applications. No additional coating or cathodic protection is required for most marine environments.
No formal MOQ for standard sizes (M6-M24) held ex-stock – we supply from single rods for urgent requirements. Custom diameters and cut lengths have an MOQ of 5 kg. Price breaks at 10, 50, and 200 rods per size.

Industrial Cities We Serve:

  • Ahmedabad
  • Aurangabad
  • Bengaluru
  • Chennai
  • Coimbatore
  • Faridabad
  • Gandhidham
  • Greater Noida
  • Gurugram
  • Hazira
  • Hosur
  • Hyderabad
  • Jamnagar
  • Jamshedpur
  • Ludhiana
  • Mumbai
  • Mundra
  • Mysuru
  • Nagpur
  • Nashik
  • Navi Mumbai
  • Noida
  • Pune
  • Rajkot
  • Sanand
  • Surat
  • Thane
  • Tiruppur
  • Vadodara
  • Visakhapatnam

Countries We Export To:

  • US
  • Canada
  • Mexico
  • Germany
  • UK
  • France
  • Italy
  • Spain
  • Netherlands
  • Belgium
  • Poland
  • Sweden
  • Norway
  • Denmark
  • Turkey
  • UAE
  • Saudi Arabia
  • Qatar
  • Oman
  • Kuwait
  • Bahrain
  • South Africa
  • Egypt
  • Nigeria
  • Australia
  • New Zealand
  • Singapore
  • Malaysia
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Brazil