+912267437972

+919022636025

enquiry@real-bolt.com

Contact Us

Titanium Grade 9 Threaded Rods Manufacturer & Exporter in India

Explore Titanium Grade 9 Threaded Rods Manufacturer & Exporter in India manufactured for demanding industrial applications with reliable strength, corrosion resistance and compliance with international standards.
Request a Quote
View Products

-250

Min Temp

600

Max Temp

🌡

600

Suitable for continuous service up to approximately 600°C under typical operating conditions.

⚡

900

Typical tensile strength around 900 MPa depending on product form and heat treatment.

🛡

Outstanding

Outstanding corrosion resistance in a wide range of industrial environments.

⚖

4.5

Typical density is approximately 4.5 g/cm³.

Product Overview

What are Titanium Grade 9 Threaded Rods?

Titanium Grade 9 threaded rods are high-strength, corrosion-resistant fasteners manufactured from a titanium alloy containing 3% aluminum and 2.5% vanadium (UNS R56320). This alpha-beta alloy offers a unique combination of moderate strength, excellent weldability, and superior corrosion resistance, making it ideal for demanding applications where weight savings and durability are critical.

Conforming to ASTM B348 and ASTM F67/F1295, Titanium Grade 9 threaded rods are widely specified in the aerospace, marine, chemical processing, and medical industries. Their low density and high specific strength make them a preferred choice for structural and fastening applications where both performance and longevity are required.

Quick Specifications

MaterialTitanium Grade 9 (Ti-3Al-2.5V)
UNS NumberR56320
DIN Number3.7195
Material StandardASTM B348
Threaded Rod Standard (Metric)DIN 976-1 / ISO 898-1
Threaded Rod Standard (Inch)ASME B18.31.3
Thread FormISO Metric / UNC / UNF
Diameter RangeM6-M64 / ¼"-2½"
Tensile Strength620 MPa (90 ksi) min
Yield Strength483 MPa (70 ksi) min
HardnessMax 225 HV
? All material certified by NABL-accredited laboratory. PMI and ultrasonic testing available on request.

Complete the Fastener Set

Other Titanium Grade 9 Fastener Products Available from RealBolt

RealBolt also manufactures the complete Titanium Grade 9 fastener range from certified titanium alloy bar stock, including Titanium Grade 9 Bolts, Titanium Grade 9 Nuts, Titanium Grade 9 Screws, Titanium Grade 9 Washers, and Titanium Grade 9 Studs. All Titanium Grade 9 fastener types are produced to ASTM with full EN 10204 MTC 3.1/3.2 documentation.
Titanium Grade 9 Bolts
Titanium Grade 9 Nuts
Titanium Grade 9 Screws
Titanium Grade 9 Washers
Titanium Grade 9 Studs

Technical Data

Titanium Grade 9 Threaded Rods Dimensions, Sizes & Thread Standards

Titanium Grade 9 Threaded Rods are available in metric M6–M100 and inch ¼″–4″ as standard. Per DIN 976-1 (metric) and ASME B18.31.3 (inch). Custom lengths up to 3 meters. Metric and inch threads available, right or left hand. All Titanium Grade 9 threaded rods dimensions conform to applicable DIN, ISO, and ASME B18 standards.

Threaded Rod Dimensions - Metric (DIN 976-1)

Size (M)Pitch (mm)Rod Dia (mm)Min L (mm)Max L (mm)
M61.06.01002000
M81.258.01002000
M101.510.01002000
M121.7512.01002000
M162.016.01002000
M202.520.01003000
M243.024.01003000
M303.530.01003000
M364.036.01003000
M424.542.01003000
M485.048.01003000
M565.556.01003000
M646.064.01003000

Dimensional & Material Standards

StandardCoversThread
DIN 976-1Threaded rods, metricMetric
ISO 898-1Mechanical propertiesMetric
ASME B18.31.3Threaded rods, inchUNC/UNF
ISO 261General purpose threadsMetric
ISO 965Thread tolerancesMetric
Material StandardRequirement
ASTM B348Bar/rod - UNS R56320
ASTM F67Unalloyed titanium fasteners
ASTM F1295Titanium alloy fasteners
EN 10204 3.1Mill test certificate
EN 10204 3.2TPI-witnessed MTC

Material Chemistry

Titanium Grade 9 Chemical Composition

Titanium Grade 9 Threaded Rods are manufactured from commercially pure or alloyed titanium with elemental limits strictly controlled per ASTM and AMS specifications. Oxygen and nitrogen contents govern strength and ductility in CP grades; aluminium and vanadium additions in Ti-6Al-4V (Grade 5) deliver 896 MPa tensile strength at 4.43 g/cm³ density.

Chemical Composition per ASTM B348

ElementComposition (%)
Titanium (Ti)Balance
Aluminum (Al)2.5-3.5
Vanadium (V)2.0-3.0
Iron (Fe)0.25 max
Oxygen (O)0.13 max
Carbon (C)0.08 max
Nitrogen (N)0.05 max
Hydrogen (H)0.015 max
? All heats verified by NABL-accredited spectrometry. PMI available on request.

Why Titanium Grade 9 Alloy Composition Matters for Threaded Rods

Al (2.5–3.5%) & V (2.0–3.0%) — Strength & Weldability
The addition of aluminum and vanadium increases the strength of Titanium Grade 9 while maintaining excellent weldability and formability, making it ideal for long threaded rods used in structural and pressure applications.
Low Interstitials — Ductility & Fatigue Resistance
Strict limits on oxygen, nitrogen, and carbon ensure high ductility and resistance to fatigue cracking, critical for threaded rods subjected to cyclic loading or vibration.
Corrosion Resistance
Titanium’s passive oxide film provides outstanding resistance to seawater, chlorides, and a wide range of acids, ensuring long service life for threaded rods in aggressive environments.

Fastener Performance

Titanium Grade 9 Threaded Rods Mechanical Properties & Torque Reference

The table below lists mechanical properties and torque reference for Titanium Grade 9 Threaded Rods per ASTM. Titanium Grade 9 threaded rods achieve 900 MPa tensile strength, with hardness, yield, and elongation values verified by NABL-accredited testing and reported in the EN 10204 MTC.

Rod SizeDry (Nm)Lubricated (Nm)Clamp Load (kN)
M12604822
M1614011244
M2028022469
M2448038499
M30950760155
M3616501320223
M4226002080295
M4839003120385
?? Anti-galling: Use molybdenum-based or PTFE anti-seize. Lubricated values assume K=0.16. Avoid copper-based compounds to prevent galvanic corrosion with titanium.

Industry Applications

Titanium Grade 9 Threaded Rods Applications — Industries & End Uses

Titanium Grade 9 Threaded Rods from RealBolt are specified across aerospace, marine, chemical processing, and medical devices where outstanding corrosion resistance and 900 MPa tensile strength are required for reliable fastener performance. Click each industry below for detailed application examples.
Titanium Grade 9 threaded rods are widely used in aircraft structural assemblies, engine mounts, and landing gear where high strength-to-weight ratio and fatigue resistance are essential. Their weldability allows for custom fabrication in critical aerospace components.
Threaded rods for hull penetrations, deck equipment, and subsea structures where resistance to seawater and marine atmospheres is required. Titanium Grade 9 offers long-term durability and eliminates the need for cathodic protection.
Used for fastening in heat exchangers, pressure vessels, and piping systems handling chlorides, acids, and brine. Titanium Grade 9 threaded rods provide superior corrosion resistance and prevent fastener failure in aggressive chemical environments.
Specified for orthopedic implants, surgical instruments, and medical equipment frames due to their biocompatibility, non-magnetic properties, and ability to withstand repeated sterilization cycles.

Titanium Grade 9 Threaded Rods Standards & International Certifications

Titanium Grade 9 Threaded Rods from RealBolt Engineering Industries are manufactured to internationally recognised fastener dimensional standards covering thread form, tolerances, strength grades, and quality requirements. Every batch ships with EN 10204 MTC 3.1/3.2, AMS material certification, AS 9100D traceability for aerospace grades, and NABL lab reports — available on request for all orders.
Standards
DIN 975 DIN 976-1 ASME B18.31.2 IS 1367
Certifications
ISO 9001:2015PED 2014/68/EUNABL LabMTC 3.1 / 3.2

Buy Titanium Grade 9 Threaded Rods from India's Leading Manufacturer — Get a Competitive Quote Today

Partner with RealBolt — India’s leading manufacturer of certified Titanium Grade 9 Threaded Rods — for competitive pricing, EN 10204 MTC 3.1/3.2 documentation, and fast Mumbai dispatch. Standard sizes are ex-stock; custom dimensions accepted with 2–3 week lead time. Request your quote today.
022-6743-7972
+91 90226 36025
Email Us

Answers for Buyers

Titanium Grade 9 Threaded Rods — Frequently Asked Questions

Browse expert answers to common questions about Titanium Grade 9 Threaded Rods from RealBolt — covering grade selection, ASTM B348/F467, seawater immunity, weight saving, galling precautions, and certification. Contact our technical team directly for project-specific guidance on Titanium Grade 9 threaded rods selection and pricing.
Titanium Grade 9 threaded rods are available to DIN 976-1 (metric), ISO 898-1, and ASME B18.31.3 (inch UNC/UNF). Custom thread forms such as BSW, BSF, and left-hand threads can be supplied on request with a typical lead time of 2-3 weeks.
Use a molybdenum-based or PTFE anti-seize compound (such as Molykote 1000 or Loctite LB 8014) on threads and nut faces. Avoid copper-based or graphite-based anti-seize to prevent galvanic corrosion. Lubricated torque values should be reduced by 20% compared to dry assembly.
Yes – Titanium Grade 9 offers outstanding resistance to seawater, chlorides, and most acids, making it ideal for threaded rods in marine, desalination, and chemical processing applications. The alloy’s passive oxide film ensures long-term durability even in aggressive environments.
No formal MOQ for standard sizes (M8-M24) held in stock – we supply from single rods for urgent requirements. Custom diameters or lengths have a minimum order of 5 kg. Price breaks are available at 25, 100, and 250 rods.

Industrial Cities We Serve:

  • Ahmedabad
  • Aurangabad
  • Bengaluru
  • Chennai
  • Coimbatore
  • Faridabad
  • Gandhidham
  • Greater Noida
  • Gurugram
  • Hazira
  • Hosur
  • Hyderabad
  • Jamnagar
  • Jamshedpur
  • Ludhiana
  • Mumbai
  • Mundra
  • Mysuru
  • Nagpur
  • Nashik
  • Navi Mumbai
  • Noida
  • Pune
  • Rajkot
  • Sanand
  • Surat
  • Thane
  • Tiruppur
  • Vadodara
  • Visakhapatnam

Countries We Export To:

  • US
  • Canada
  • Mexico
  • Germany
  • UK
  • France
  • Italy
  • Spain
  • Netherlands
  • Belgium
  • Poland
  • Sweden
  • Norway
  • Denmark
  • Turkey
  • UAE
  • Saudi Arabia
  • Qatar
  • Oman
  • Kuwait
  • Bahrain
  • South Africa
  • Egypt
  • Nigeria
  • Australia
  • New Zealand
  • Singapore
  • Malaysia
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Brazil