+912267437972

+919022636025

enquiry@real-bolt.com

Contact Us

Nimonic 105 Threaded Rods Manufacturer & Exporter in India

Explore Nimonic 105 Threaded Rods Manufacturer & Exporter in India manufactured for demanding industrial applications with reliable strength, corrosion resistance and compliance with international standards.
Request a Quote
View Products

-196

Min Temp

870

Max Temp

🌡

870

Suitable for continuous service up to approximately 870°C under typical operating conditions.

⚡

620

Typical tensile strength around 620 MPa depending on product form and heat treatment.

🛡

Very Good

Very Good corrosion resistance in a wide range of industrial environments.

⚖

8

Typical density is approximately 8.0 g/cm³.

Product Overview

What are Nimonic 105 Threaded Rods?

Nimonic 105 threaded rods are high-strength nickel-chromium-cobalt alloy fasteners manufactured from UNS N13021 bar stock, conforming to ASTM B637. Designed for extreme temperature service, these rods utilize precipitation hardening via titanium and aluminum additions, achieving exceptional tensile and creep-rupture strength up to 1050°C.

With a balanced composition of chromium (15-21%), cobalt (19-21%), and reinforced by titanium and aluminum, Nimonic 105 threaded rods are the preferred choice for gas turbine, aerospace, and high-temperature bolting applications where conventional stainless steels fail due to thermal softening or oxidation.

Quick Specifications

MaterialNimonic 105
UNS NumberN13021
DIN Number2.4634
Material StandardASTM B637
Rod Standard (Metric)DIN 975 / DIN 976
Rod Standard (Inch)ASME B18.31.3
Thread FormISO Metric / UNC / UNF
Diameter RangeM6-M64 / ¼"-2½"
Tensile Strength1100 MPa (160 ksi) min
Yield Strength800 MPa (116 ksi) min
HardnessMax 38 HRC / 350 HB
? All material certified by NABL-accredited laboratory. PMI and hardness survey available on request.

Complete the Fastener Set

Other Nimonic 105 Fastener Products Available from RealBolt

RealBolt also manufactures the complete Nimonic 105 fastener range from certified nickel-chromium-cobalt superalloy bar stock, including Nimonic 105 Bolts, Nimonic 105 Nuts, Nimonic 105 Screws, Nimonic 105 Washers, and Nimonic 105 Studs. All Nimonic 105 fastener types are produced to ASTM with full EN 10204 MTC 3.1/3.2 documentation.
Nimonic 105 Bolts
Nimonic 105 Nuts
Nimonic 105 Screws
Nimonic 105 Washers
Nimonic 105 Studs

Technical Data

Nimonic 105 Threaded Rods Dimensions, Sizes & Thread Standards

Nimonic 105 Threaded Rods are available in metric M6–M100 and inch ¼″–4″ as standard. Per DIN 975 (full thread) / DIN 976 (studs) / ASME B18.31.3. Custom lengths up to 3 meters. Inch and metric threads available. All Nimonic 105 threaded rods dimensions are verified against applicable DIN, ISO, and

Threaded Rod Dimensions - Metric (DIN 975)

Size (M)Pitch (mm)Rod Length (mm)Thread Type
M61.01000 / 2000 / 3000Full
M81.251000 / 2000 / 3000Full
M101.51000 / 2000 / 3000Full
M121.751000 / 2000 / 3000Full
M162.01000 / 2000 / 3000Full
M202.51000 / 2000 / 3000Full
M243.01000 / 2000 / 3000Full
M303.51000 / 2000 / 3000Full
M364.01000 / 2000 / 3000Full
M424.51000 / 2000 / 3000Full
M485.01000 / 2000 / 3000Full
M565.51000 / 2000 / 3000Full
M646.01000 / 2000 / 3000Full

Dimensional & Material Standards

StandardCoversThread
DIN 975Threaded rods, full threadMetric
DIN 976Stud bolts, double endMetric
ASME B18.31.3Threaded rodsUNC/UNF
ISO 898-1Mechanical propertiesMetric
Material StandardRequirement
ASTM B637Bar/rod - UNS N13021
AMS 5829High-temp fasteners
EN 10204 3.1Mill test certificate
EN 10204 3.2TPI-witnessed MTC

Material Chemistry

Nimonic 105 Chemical Composition

Nimonic 105 Threaded Rods are manufactured from a precipitation-hardened nickel-chromium-cobalt superalloy with titanium and aluminium additions per AMS and BS HR specifications. These elements form the gamma-prime (Ni₃Al,Ti) precipitate phase that delivers creep rupture strength above 700°C — a performance level unachievable with standard nickel or stainless alloys.

Chemical Composition per ASTM B637

ElementComposition (%)
Nickel (Ni)Base (=49%)
Chromium (Cr)15.0-21.0
Cobalt (Co)19.0-21.0
Titanium (Ti)4.5-5.2
Aluminium (Al)4.5-5.2
Carbon (C)0.12 max
Zirconium (Zr)0.12-0.20
Silicon (Si)1.0 max
Manganese (Mn)1.0 max
Iron (Fe)5.0 max
Boron (B)0.010-0.020
? All heats verified by NABL-accredited spectrometry. PMI available on request.

Why Nimonic 105 Alloy Composition Matters for Threaded Rods

Ti + Al (4.5–5.2% each) — Precipitation Hardening
Titanium and aluminum combine to form gamma prime (?') precipitates, delivering outstanding high-temperature strength and creep resistance, essential for threaded rods in turbine and engine assemblies.
Co (19–21%) — Thermal Stability
Cobalt enhances hot strength and oxidation resistance, ensuring Nimonic 105 threaded rods retain mechanical properties at temperatures exceeding 950°C.
Cr (15–21%) — Oxidation & Corrosion Resistance
Chromium provides a protective oxide layer, making these rods suitable for aggressive, high-temperature environments where stainless steels fail.

Fastener Performance

Nimonic 105 Threaded Rods Mechanical Properties & Torque Reference

The table below lists mechanical properties and torque reference for Nimonic 105 Threaded Rods per ASTM. Nimonic 105 threaded rods achieve 620 MPa tensile strength, with hardness, yield, and elongation values verified by NABL-accredited testing and reported in the EN 10204 MTC.

Rod SizeDry (Nm)Lubricated (Nm)Clamp Load (kN)
M121209640
M1630024090
M20600480145
M241050840210
M3021001680340
M3637002960500
M4259004720700
M4888007040950
?? Anti-galling: Use nickel-based anti-seize (Molykote P-37 or equivalent). Lubricated values assume K=0.15. Avoid copper-based anti-seize on nickel alloys.

Industry Applications

Nimonic 105 Threaded Rods Applications — Industries & End Uses

Nimonic 105 Threaded Rods from RealBolt are specified across aerospace gas turbines, power generation, and high-temperature furnaces where very good corrosion resistance and 620 MPa tensile strength are required for reliable fastener performance. Click each industry below for detailed application examples.
Nimonic 105 threaded rods are specified for gas turbine engine casings, afterburner assemblies, and jet engine mounting hardware where high-temperature strength and oxidation resistance are critical. AMS 5829 and Rolls-Royce MSRR 7137 approved.
Used in turbine casing tie rods, HRSG ducting, and exhaust flange connections in combined cycle and peaking power plants. Nimonic 105 rods maintain preload and resist creep at sustained temperatures above 900°C.
Threaded rods for high-temperature reformer tube supports, ethylene cracker furnace assemblies, and catalyst basket tie rods where stainless steel fasteners fail due to thermal cycling and carburization.
Nimonic 105 rods are used in racing engine head studs, turbocharger mounting, and exhaust manifold connections for their ability to withstand extreme heat and vibration without loss of tension.

Nimonic 105 Threaded Rods Standards & International Certifications

Nimonic 105 Threaded Rods from RealBolt Engineering Industries are manufactured to internationally recognised fastener dimensional standards covering thread form, tolerances, strength grades, and quality requirements. Every batch ships with EN 10204 MTC 3.1/3.2, AMS material certification, heat treatment records, and first article inspection report (FAIR) — available on request for all orders.
Standards
DIN 975 DIN 976-1 ASME B18.31.2 IS 1367
Certifications
ISO 9001:2015NABL LabPED 2014/68/EUMTC 3.1 / 3.2

Buy Nimonic 105 Threaded Rods from India's Leading Manufacturer — Get a Competitive Quote Today

Partner with RealBolt — India’s leading manufacturer of certified Nimonic 105 Threaded Rods — for competitive pricing, EN 10204 MTC 3.1/3.2 documentation, and fast Mumbai dispatch. Standard sizes are ex-stock; custom dimensions accepted with 2–3 week lead time. Request your quote today.
022-6743-7972
+91 90226 36025
Email Us

Answers for Buyers

Nimonic 105 Threaded Rods — Frequently Asked Questions

Browse expert answers to common questions about Nimonic 105 Threaded Rods from RealBolt — covering AMS specification, heat treatment, creep rupture data, max service temperature, sizes, and aerospace certification. Contact our technical team directly for project-specific guidance on Nimonic 105 threaded rods selection and pricing.
Nimonic 105 threaded rods are available to DIN 975 (full thread, metric), DIN 976 (studs), and ASME B18.31.3 (inch UNC/UNF). Custom thread forms such as BSF, BSW, and fine pitch metric are available on request. All rods are supplied with rolled or cut threads as specified.
Always use a nickel-based anti-seize compound (such as Molykote P-37 or Jet-Lube Pure Nickel) on threads and nut faces. This prevents galling and ensures consistent preload. Do not use copper-based anti-seize on nickel alloys due to galvanic corrosion risk.
Yes – Nimonic 105 is engineered for continuous service up to 1050°C, retaining high tensile and creep strength. It is widely used in turbine, furnace, and engine applications where standard stainless or Inconel rods would soften or lose tension.
No MOQ for standard sizes (M8-M30) in stock – single rods can be supplied for urgent maintenance. Custom diameters or cut lengths have a 10 kg minimum. Price breaks at 10, 50, and 100 rods.

Industrial Cities We Serve:

  • Ahmedabad
  • Aurangabad
  • Bengaluru
  • Chennai
  • Coimbatore
  • Faridabad
  • Gandhidham
  • Greater Noida
  • Gurugram
  • Hazira
  • Hosur
  • Hyderabad
  • Jamnagar
  • Jamshedpur
  • Ludhiana
  • Mumbai
  • Mundra
  • Mysuru
  • Nagpur
  • Nashik
  • Navi Mumbai
  • Noida
  • Pune
  • Rajkot
  • Sanand
  • Surat
  • Thane
  • Tiruppur
  • Vadodara
  • Visakhapatnam

Countries We Export To:

  • US
  • Canada
  • Mexico
  • Germany
  • UK
  • France
  • Italy
  • Spain
  • Netherlands
  • Belgium
  • Poland
  • Sweden
  • Norway
  • Denmark
  • Turkey
  • UAE
  • Saudi Arabia
  • Qatar
  • Oman
  • Kuwait
  • Bahrain
  • South Africa
  • Egypt
  • Nigeria
  • Australia
  • New Zealand
  • Singapore
  • Malaysia
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Brazil