+912267437972

+919022636025

enquiry@real-bolt.com

Contact Us

Titanium Grade 1 Threaded Rods Manufacturer & Exporter in India

Explore Titanium Grade 1 Threaded Rods Manufacturer & Exporter in India manufactured for demanding industrial applications with reliable strength, corrosion resistance and compliance with international standards.
Request a Quote
View Products

-250

Min Temp

600

Max Temp

🌡

600

Suitable for continuous service up to approximately 600°C under typical operating conditions.

⚡

900

Typical tensile strength around 900 MPa depending on product form and heat treatment.

🛡

Outstanding

Outstanding corrosion resistance in a wide range of industrial environments.

⚖

4.5

Typical density is approximately 4.5 g/cm³.

Product Overview

What are Titanium Grade 1 Threaded Rods?

Titanium Grade 1 threaded rods are precision fasteners manufactured from commercially pure titanium (UNS R50250), conforming to ASTM B348 and ASTM F67 standards. As the softest and most ductile of all titanium grades, Grade 1 offers exceptional corrosion resistance, high ductility, and outstanding formability, making it ideal for threaded rod applications in aggressive chemical and marine environments.

These rods are non-magnetic, lightweight (density 4.51 g/cm³), and maintain their mechanical integrity in both oxidizing and reducing conditions. Titanium Grade 1 threaded rods are widely specified for critical bolted joints in desalination, chemical processing, and medical device assemblies where maximum corrosion resistance and biocompatibility are required.

Quick Specifications

MaterialTitanium Grade 1
UNS NumberR50250
DIN Number3.7025
Material StandardASTM B348 / ASTM F67
Rod Standard (Metric)DIN 975 / DIN 976 / ISO 898-1
Rod Standard (Inch)ASME B18.31.3
Thread FormISO Metric / UNC / UNF
Diameter RangeM3-M64 / ?"-2½"
Tensile Strength240 MPa (35 ksi) min
Yield Strength170 MPa (25 ksi) min
HardnessMax 80 HRB / 160 HB
? All material certified by NABL-accredited laboratory. PMI and full traceability available on request.

Complete the Fastener Set

Other Titanium Grade 1 Fastener Products Available from RealBolt

RealBolt also manufactures the complete Titanium Grade 1 fastener range from certified titanium alloy bar stock, including Titanium Grade 1 Bolts, Titanium Grade 1 Nuts, Titanium Grade 1 Screws, Titanium Grade 1 Washers, and Titanium Grade 1 Studs. All Titanium Grade 1 fastener types are produced to ASTM with full EN 10204 MTC 3.1/3.2 documentation.
Titanium Grade 1 Bolts
Titanium Grade 1 Nuts
Titanium Grade 1 Screws
Titanium Grade 1 Washers
Titanium Grade 1 Studs

Technical Data

Titanium Grade 1 Threaded Rods Dimensions, Sizes & Thread Standards

Titanium Grade 1 Threaded Rods are available in metric M6–M100 and inch ¼″–4″ as standard. Per DIN 975 (full thread) / DIN 976 (studs) / ISO 898-1. Custom lengths up to 3 meters. Inch dimensions available per ASME B18.31.3. All Titanium Grade 1 threaded rods dimensions conform to applicable DIN, ISO, and ASME B18 standards.

Threaded Rod Dimensions - Metric (DIN 975)

Size (M)Pitch (mm)Rod Dia (mm)Standard Length (mm)Min L (mm)Max L (mm)
M30.5310001002000
M61.0610001002000
M81.25810001002000
M101.51010001003000
M121.751210001003000
M162.01610001003000
M202.52010001003000
M243.02410001003000
M303.53010001003000
M364.03610001003000
M424.54210001003000
M485.04810001003000
M565.55610001003000
M646.06410001003000

Dimensional & Material Standards

StandardCoversThread
DIN 975Threaded rods, full threadMetric
DIN 976Stud bolts, double endMetric
ISO 898-1Mechanical propertiesMetric
ASME B18.31.3Threaded rods, inchUNC/UNF
ISO 261Metric thread profileMetric
Material StandardRequirement
ASTM B348Bar/rod - UNS R50250
ASTM F67Unalloyed titanium fasteners
EN 10204 3.1Mill test certificate
EN 10204 3.2TPI-witnessed MTC

Material Chemistry

Titanium Grade 1 Chemical Composition

Titanium Grade 1 Threaded Rods are manufactured from commercially pure or alloyed titanium with elemental limits strictly controlled per ASTM and AMS specifications. Oxygen and nitrogen contents govern strength and ductility in CP grades; aluminium and vanadium additions in Ti-6Al-4V (Grade 5) deliver 896 MPa tensile strength at 4.43 g/cm³ density.

Chemical Composition per ASTM B348

ElementComposition (%)
Titanium (Ti)Balance
Iron (Fe)0.20% max
Oxygen (O)0.18% max
Carbon (C)0.08% max
Nitrogen (N)0.03% max
Hydrogen (H)0.015% max
Other Elements (each)0.10% max
Other Elements (total)0.40% max
? All heats verified by NABL-accredited spectrometry. PMI available on request.

Why Titanium Grade 1 Alloy Composition Matters for Threaded Rods

High Purity Titanium — Corrosion Resistance
The extremely low content of interstitial elements (O, N, C, H) in Grade 1 titanium ensures maximum corrosion resistance in chloride, hypochlorite, and oxidizing acid environments, making these rods ideal for chemical plant and desalination bolting.
Low Iron Content — Prevents Galvanic Attack
With iron limited to 0.20% max, Titanium Grade 1 threaded rods minimize the risk of galvanic corrosion when in contact with other metals, especially in seawater and brine applications.
Biocompatibility
The absence of alloying elements and extremely low impurity levels make Grade 1 titanium fully biocompatible, suitable for medical and pharmaceutical bolted assemblies.

Fastener Performance

Titanium Grade 1 Threaded Rods Mechanical Properties & Torque Reference

The table below lists mechanical properties and torque reference for Titanium Grade 1 Threaded Rods per ASTM. Titanium Grade 1 threaded rods achieve 900 MPa tensile strength, with hardness, yield, and elongation values verified by NABL-accredited testing and reported in the EN 10204 MTC.

Rod SizeDry (Nm)Lubricated (Nm)Clamp Load (kN)
M6543.5
M812106.5
M10241910.5
M12423415.5
M161058427.5
M2021016843.5
M2436028862.5
M30720576102.5
?? Anti-galling: Use PTFE-based or molybdenum disulfide anti-seize. Lubricated values assume K=0.16. Avoid copper-based anti-seize to prevent galvanic corrosion with titanium.

Industry Applications

Titanium Grade 1 Threaded Rods Applications — Industries & End Uses

Titanium Grade 1 Threaded Rods from RealBolt are specified across aerospace, marine, chemical processing, and medical devices where outstanding corrosion resistance and 900 MPa tensile strength are required for reliable fastener performance. Click each industry below for detailed application examples.
Titanium Grade 1 threaded rods are the preferred choice for bolted joints in seawater desalination plants, reverse osmosis skids, and brine concentrators due to their unmatched resistance to chloride-induced corrosion and biofouling.
Used for flange connections, reactor closures, and tank nozzles in chlorine, hypochlorite, and oxidizing acid service where stainless steel fasteners fail. Grade 1’s high ductility allows for easy installation and removal during maintenance.
Threaded rods for medical device frames, cleanroom assemblies, and pharmaceutical process equipment where biocompatibility, non-magnetic properties, and corrosion resistance are critical. Supplied with EN 10204 3.1 certification.
Ideal for splash zone supports, riser clamps, and deck equipment in offshore platforms and ships, where long-term exposure to seawater and atmospheric chlorides demands maximum corrosion resistance.

Titanium Grade 1 Threaded Rods Standards & International Certifications

Titanium Grade 1 Threaded Rods from RealBolt Engineering Industries are manufactured to internationally recognised fastener dimensional standards covering thread form, tolerances, strength grades, and quality requirements. Every batch ships with EN 10204 MTC 3.1/3.2, AMS material certification, AS 9100D traceability for aerospace grades, and NABL lab reports — available on request for all orders.
Standards
DIN 975 DIN 976-1 ASME B18.31.2 IS 1367
Certifications
ISO 9001:2015PED 2014/68/EUNABL LabMTC 3.1 / 3.2CE Marking

Buy Titanium Grade 1 Threaded Rods from India's Leading Manufacturer — Get a Competitive Quote Today

Partner with RealBolt — India’s leading manufacturer of certified Titanium Grade 1 Threaded Rods — for competitive pricing, EN 10204 MTC 3.1/3.2 documentation, and fast Mumbai dispatch. Standard sizes are ex-stock; custom dimensions accepted with 2–3 week lead time. Request your quote today.
022-6743-7972
+91 90226 36025
Email Us

Answers for Buyers

Titanium Grade 1 Threaded Rods — Frequently Asked Questions

Browse expert answers to common questions about Titanium Grade 1 Threaded Rods from RealBolt — covering grade selection, ASTM B348/F467, seawater immunity, weight saving, galling precautions, and certification. Contact our technical team directly for project-specific guidance on Titanium Grade 1 threaded rods selection and pricing.
Titanium Grade 1 threaded rods are available to DIN 975 (full thread), DIN 976 (studs), ISO 898-1 (mechanical properties), and ASME B18.31.3 (inch series). Custom thread forms such as UNC, UNF, and Whitworth can be supplied on request. All rods are manufactured from ASTM B348 or ASTM F67 certified bar stock.
Use a PTFE-based or molybdenum disulfide anti-seize compound (such as Molykote 1000 or Loctite LB 8014) to prevent galling and facilitate disassembly. Avoid copper-based anti-seize to prevent galvanic corrosion with titanium. Apply to threads and nut faces for best results.
Yes – Titanium Grade 1 offers outstanding resistance to seawater, brine, and chlorine-rich environments, making it ideal for desalination, marine, and chlor-alkali plant bolting. It is immune to crevice and pitting corrosion in these aggressive media, outperforming stainless steels.
No MOQ for standard sizes (M6-M24) held in stock – we supply from single rods for urgent maintenance. Custom diameters or lengths have a 5 kg minimum. Price breaks are available at 25, 100, and 250 rods. All orders include full certification.

Industrial Cities We Serve:

  • Ahmedabad
  • Aurangabad
  • Bengaluru
  • Chennai
  • Coimbatore
  • Faridabad
  • Gandhidham
  • Greater Noida
  • Gurugram
  • Hazira
  • Hosur
  • Hyderabad
  • Jamnagar
  • Jamshedpur
  • Ludhiana
  • Mumbai
  • Mundra
  • Mysuru
  • Nagpur
  • Nashik
  • Navi Mumbai
  • Noida
  • Pune
  • Rajkot
  • Sanand
  • Surat
  • Thane
  • Tiruppur
  • Vadodara
  • Visakhapatnam

Countries We Export To:

  • US
  • Canada
  • Mexico
  • Germany
  • UK
  • France
  • Italy
  • Spain
  • Netherlands
  • Belgium
  • Poland
  • Sweden
  • Norway
  • Denmark
  • Turkey
  • UAE
  • Saudi Arabia
  • Qatar
  • Oman
  • Kuwait
  • Bahrain
  • South Africa
  • Egypt
  • Nigeria
  • Australia
  • New Zealand
  • Singapore
  • Malaysia
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Brazil