+912267437972

+919022636025

enquiry@real-bolt.com

Contact Us

DIN 562 Thin Square Nuts (Low Profile) – Manufacturer, Exporter & Supplier

We manufacture and export DIN 562 Thin Square Nuts (Low Profile) conforming to exact DIN 562 dimensional and mechanical specifications. Available in 04 / A2, our DIN 562 square nuts pass rigorous in-house testing — hardness, tensile and dimensional — before dispatch. ISO 9001:2015 certified production, EN 10204 3.1 mill test reports supplied as standard, and dedicated export documentation for 50+ destination countries.
Request a Quote
View Standards

DIN 562 Key Specifications

The core specification data for DIN 562 Thin Square Nuts (Low Profile), at a glance.

Standard

DIN 562

Type

Thin Square Nuts (Low Profile)

Size Range

M1.6 to M10

Thread Pitch

Coarse

Property Class / Grade

04 / A2

Head / Drive Type

Thin Square

About DIN 562 Thin Square Nuts (Low Profile)

DIN 562 Thin Square Nuts (Low Profile) are square nuts produced and tested to the exact requirements of the DIN 562 specification. Featuring a Thin Square configuration with Coarse thread form, they are available in property classes 04 / A2 across a size range of M1.6 to M10. The DIN 562 standard governs dimensional tolerances, mechanical properties including tensile strength, proof load and hardness, as well as surface finish requirements to ensure dependable performance in Electronics and Precision Instruments applications worldwide.
Our DIN 562 Thin Square Nuts (Low Profile) are cold-forged from certified bar stock, heat-treated where required, and thread-rolled to guarantee consistent fit and fatigue performance. Every batch is documented with an EN 10204 3.1 Mill Test Report covering chemical composition, mechanical test results and dimensional inspection. Available in zinc electroplated, hot-dip galvanised, Geomet, Dacromet and black oxide finishes to match corrosion-resistance requirements for Light Machinery, Electrical Panels and General Engineering applications. As a global exporter of DIN 562 fasteners, we consolidate orders with other standard-specification items into single shipments, backed by complete customs documentation for over 50 countries.
Technical Specifications

Raw Material

04 Alloy / Stainless Steel

Country of Origin

India

Standard Body

DIN

Corrosion Resistance

Salt-spray tested to relevant grade

Recommended Torque

Per property class / grade

Storage Conditions

Dry, corrosion-inhibited packing

DIN 562 Dimensions & Size Chart

Precise dimensional data for every DIN 562 Thin Square Nuts (Low Profile) size, cross-referenced against the standard’s key measurement points.
Size (M)b (mm)e min (mm)m (mm)
M1.63.23.701.0
M24.04.621.2
M2.55.05.771.6
M35.56.351.8
M47.08.082.2
M58.09.242.7
M610.011.633.2
M813.015.124.0
M1017.019.775.0
Key Dimension Callouts

d

Nominal internal thread diameter of the square nut.

P

Thread pitch measured between adjacent thread crests.

m

Nut height measured perpendicular to bearing faces.

s

Width across flats defining the square nut size.

Browse Related DIN Fastener Standards and Technical Specifications

Additional DIN fastener standards support accurate selection of bolts, screws, nuts, washers, stud bolts, threaded rods and other industrial fasteners. Compare dimensions, tolerances, thread specifications, mechanical properties, material grades and quality requirements across related DIN engineering specifications to identify the most suitable manufacturing standard for your mechanical fastening, procurement or industrial application needs.
DIN 84
DIN 85
DIN 125A
DIN 126
DIN 127
DIN 128
DIN 315
DIN 433
DIN 434
DIN 436
DIN 439
DIN 440
DIN 557
DIN 603
DIN 608
DIN 609
DIN 610
DIN 6912
DIN 6914
DIN 6921
DIN 6923
DIN 7984
DIN 7985
DIN 7990
DIN 7991
DIN 9021
DIN 912
DIN 913
DIN 914
DIN 915
DIN 916
DIN 928
DIN 929
DIN 931
DIN 933
DIN 934
DIN 935
DIN 936
DIN 937
DIN 938
DIN 939
DIN 940
DIN 960
DIN 961
DIN 965
DIN 966
DIN 967
DIN 975
DIN 976-1
DIN 980
DIN 982
DIN 985
DIN 1587
DIN 6796
DIN 6797

DIN 562 Thin Square Nuts (Low Profile) – Material Grades & Property Classes

DIN 562 Thin Square Nuts (Low Profile) are available across multiple property classes and surface finish options to match load-bearing and corrosion-resistance requirements for Electronics, Precision Instruments and Light Machinery applications.
Property Classes
04 A2
Surface Treatments
Zinc Electroplated Hot-Dip Galvanised (HDG) Geomet Coating Dacromet Coating Black Oxide Phosphate & Oil Plain (Self Colour) Nickel Plated

Why Choose Us for DIN 562 Thin Square Nuts (Low Profile)?

Nine reasons buyers worldwide rely on us as their DIN 562 Thin Square Nuts (Low Profile) manufacturer and export partner.
ISO Certified Production

Every batch of DIN 562 Thin Square Nuts (Low Profile) is manufactured under an ISO 9001:2015 certified quality management system with full in-process control.

EN 10204 3.1 MTR Supplied

A mill test report covering chemical composition, tensile, hardness and dimensional inspection accompanies every DIN 562 Thin Square Nuts (Low Profile) shipment.

48-hr Dispatch on Stock Items

Commonly stocked DIN 562 Thin Square Nuts (Low Profile) sizes leave our warehouse within 48 hours of order confirmation, minimising your downtime.

Export to 50+ Countries

Established freight and customs partners ensure reliable delivery of DIN 562 Thin Square Nuts (Low Profile) to buyers in over 50 countries worldwide.

Custom Sizes & Lengths

Non-standard DIN 562 Thin Square Nuts (Low Profile) lengths, diameters and special thread pitches are produced to order to match your drawing requirements.

Competitive Factory Pricing

Direct-from-factory pricing on DIN 562 Thin Square Nuts (Low Profile) with no middleman markup, offering the best value on volume and repeat orders.

In-House Metallurgical Testing

Hardness, tensile strength and dimensional checks for DIN 562 Thin Square Nuts (Low Profile) are performed in our in-house laboratory before every release.

Consolidated Multi-Standard Shipping

Combine DIN 562 Thin Square Nuts (Low Profile) with other standard-specification fasteners into a single container shipment to reduce freight costs.

Dedicated Export Documentation Team

Our specialist team prepares all customs, compliance and shipping paperwork for every DIN 562 Thin Square Nuts (Low Profile) export order.

DIN 562 Thin Square Nuts (Low Profile) – Applications & End Uses

DIN 562 Thin Square Nuts (Low Profile) are widely specified across multiple industries. Select an industry below to see how our DIN 562 square nuts are applied.
DIN 562 Thin Square Nuts (Low Profile) are used in electronics for critical fastening applications where dimensional accuracy and mechanical performance are essential. Grade 04 is most commonly specified for electronics environments.
In precision instruments, DIN 562 Thin Square Nuts (Low Profile) are valued for consistent dimensions and reliable load-bearing capability. We supply with full test documentation to support quality audits and project inspections.
DIN 562 Thin Square Nuts (Low Profile) are used in light machinery assemblies where precise torque control and consistent fit are critical. We supply to OEM manufacturers and contractors with custom packaging formats.
For electrical panels applications, DIN 562 Thin Square Nuts (Low Profile) are supplied with material test reports, dimensional inspection certificates and PPAP documentation where required.
DIN 562 Thin Square Nuts (Low Profile) for general engineering use are selected from stainless steel or coated grades to provide appropriate corrosion resistance while maintaining specified mechanical performance.
In general engineering applications, DIN 562 Thin Square Nuts (Low Profile) are fastened into assemblies requiring long-term reliability. Our export-packaged DIN 562 square nuts arrive protected from transit corrosion with full documentation.

Request a Quote for DIN 562 Thin Square Nuts (Low Profile)

Get pricing and lead times for your required sizes and quantities. ISO 9001 certified. EN 10204 3.1 MTR supplied. Export to 50+ countries.
022-6743-7972
+91 90226 36025
Email Us

Frequently Asked Questions About DIN 562

Common questions from buyers sourcing DIN 562 Thin Square Nuts (Low Profile), covering sizes, grades, documentation and lead times.
We supply DIN 562 Thin Square Nuts (Low Profile) from M1.6 to M10 in Coarse thread. Standard lengths are stocked; non-standard lengths are produced to order. Contact us with your exact requirements for availability confirmation.
DIN 562 Thin Square Nuts (Low Profile) are supplied in 04 / A2. Carbon and alloy steel grades comply with ISO 898-1 and stainless steel grades comply with ISO 3506. ASTM grades are available for USA and Canadian export orders.
Every DIN 562 Thin Square Nuts (Low Profile) order includes an EN 10204 3.1 Mill Test Report covering chemical composition, tensile strength, hardness and proof load. Third-party inspection by SGS, BV or TUV can be arranged on request.
Stocked DIN 562 Thin Square Nuts (Low Profile) sizes dispatch within 48 hours of order confirmation. Custom lengths, special grades or surface finishes typically ship within 2-3 weeks. Contact us for a specific lead time on your required size and quantity.

Industrial Cities We Serve:

  • Ahmedabad
  • Aurangabad
  • Bengaluru
  • Chennai
  • Coimbatore
  • Faridabad
  • Gandhidham
  • Greater Noida
  • Gurugram
  • Hazira
  • Hosur
  • Hyderabad
  • Jamnagar
  • Jamshedpur
  • Ludhiana
  • Mumbai
  • Mundra
  • Mysuru
  • Nagpur
  • Nashik
  • Navi Mumbai
  • Noida
  • Pune
  • Rajkot
  • Sanand
  • Surat
  • Thane
  • Tiruppur
  • Vadodara
  • Visakhapatnam

Countries We Export To:

  • US
  • Canada
  • Mexico
  • Germany
  • UK
  • France
  • Italy
  • Spain
  • Netherlands
  • Belgium
  • Poland
  • Sweden
  • Norway
  • Denmark
  • Turkey
  • UAE
  • Saudi Arabia
  • Qatar
  • Oman
  • Kuwait
  • Bahrain
  • South Africa
  • Egypt
  • Nigeria
  • Australia
  • New Zealand
  • Singapore
  • Malaysia
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Brazil