EN ISO 4014
Hexagon Head Bolts – Partially Threaded (EN ISO adoption)
M1.6 to M64
Coarse & Fine
4.6 / 5.6 / 8.8 / 10.9 / A2-70 / A4-70
Hex Head / Partial Thread
4.6 Alloy / Stainless Steel
India
EN
Salt-spray tested to relevant grade
Per property class / grade
Dry, corrosion-inhibited packing
| Size (M) | s (mm) | k (mm) | b (mm) | L Range (mm) |
|---|---|---|---|---|
| M6 | 10 | 4.0 | 18 | 20–200 |
| M8 | 13 | 5.3 | 22 | 25–200 |
| M10 | 17 | 6.4 | 26 | 30–200 |
| M12 | 19 | 7.5 | 30 | 35–200 |
| M16 | 24 | 10.0 | 38 | 45–200 |
| M20 | 30 | 12.5 | 46 | 55–200 |
| M24 | 36 | 15.0 | 54 | 65–200 |
| M30 | 46 | 18.7 | 66 | 80–200 |
Nominal thread diameter measured across the major thread.
Bolt length measured from bearing surface to end.
Thread length measured from bolt end along shank.
Across-flats width of hexagon head for wrenching.
Every batch of EN ISO 4014 Hexagon Head Bolts – Partially Threaded (EN ISO adoption) is manufactured under an ISO 9001:2015 certified quality management system with full in-process control.
A mill test report covering chemical composition, tensile, hardness and dimensional inspection accompanies every EN ISO 4014 Hexagon Head Bolts – Partially Threaded (EN ISO adoption) shipment.
Commonly stocked EN ISO 4014 Hexagon Head Bolts – Partially Threaded (EN ISO adoption) sizes leave our warehouse within 48 hours of order confirmation, minimising your downtime.
Established freight and customs partners ensure reliable delivery of EN ISO 4014 Hexagon Head Bolts – Partially Threaded (EN ISO adoption) to buyers in over 50 countries worldwide.
Non-standard EN ISO 4014 Hexagon Head Bolts – Partially Threaded (EN ISO adoption) lengths, diameters and special thread pitches are produced to order to match your drawing requirements.
Direct-from-factory pricing on EN ISO 4014 Hexagon Head Bolts – Partially Threaded (EN ISO adoption) with no middleman markup, offering the best value on volume and repeat orders.
Hardness, tensile strength and dimensional checks for EN ISO 4014 Hexagon Head Bolts – Partially Threaded (EN ISO adoption) are performed in our in-house laboratory before every release.
Combine EN ISO 4014 Hexagon Head Bolts – Partially Threaded (EN ISO adoption) with other standard-specification fasteners into a single container shipment to reduce freight costs.
Our specialist team prepares all customs, compliance and shipping paperwork for every EN ISO 4014 Hexagon Head Bolts – Partially Threaded (EN ISO adoption) export order.
