SAE J1199
Mechanical and Material Requirements for Metric Fasteners (SAE)
M5 to M36
Coarse & Fine
4.8 / 8.8 / 10.9 / 12.9 / A2-70 / A4-80
Hex / Socket / Stud
4.8 Alloy / Stainless Steel
India
SAE
Salt-spray tested to relevant grade
Per property class / grade
Dry, corrosion-inhibited packing
| Property Class | Min Tensile (MPa) | Min Yield (MPa) | Hardness (HRC) | Size Range |
|---|---|---|---|---|
| 4.8 | 420 | 340 | — | M5–M36 |
| 8.8 | 800 | 640 | 22–32 | M5–M36 |
| 10.9 | 1040 | 940 | 33–39 | M5–M36 |
| 12.9 | 1220 | 1100 | 39–44 | M5–M36 |
| A2-70 | 700 | 450 | — | M5–M36 |
| A4-80 | 800 | 600 | — | M5–M36 |
Nominal metric thread diameter measured across thread crests.
Axial distance between adjacent metric thread crests.
Overall fastener length measured from bearing surface.
Threaded portion length along the fastener shank.
Every batch of SAE J1199 Mechanical and Material Requirements for Metric Fasteners (SAE) is manufactured under an ISO 9001:2015 certified quality management system with full in-process control.
A mill test report covering chemical composition, tensile, hardness and dimensional inspection accompanies every SAE J1199 Mechanical and Material Requirements for Metric Fasteners (SAE) shipment.
Commonly stocked SAE J1199 Mechanical and Material Requirements for Metric Fasteners (SAE) sizes leave our warehouse within 48 hours of order confirmation, minimising your downtime.
Established freight and customs partners ensure reliable delivery of SAE J1199 Mechanical and Material Requirements for Metric Fasteners (SAE) to buyers in over 50 countries worldwide.
Non-standard SAE J1199 Mechanical and Material Requirements for Metric Fasteners (SAE) lengths, diameters and special thread pitches are produced to order to match your drawing requirements.
Direct-from-factory pricing on SAE J1199 Mechanical and Material Requirements for Metric Fasteners (SAE) with no middleman markup, offering the best value on volume and repeat orders.
Hardness, tensile strength and dimensional checks for SAE J1199 Mechanical and Material Requirements for Metric Fasteners (SAE) are performed in our in-house laboratory before every release.
Combine SAE J1199 Mechanical and Material Requirements for Metric Fasteners (SAE) with other standard-specification fasteners into a single container shipment to reduce freight costs.
Our specialist team prepares all customs, compliance and shipping paperwork for every SAE J1199 Mechanical and Material Requirements for Metric Fasteners (SAE) export order.
