+912267437972

+919022636025

enquiry@real-bolt.com

Contact Us

Titanium Grade 1 Bolts Manufacturer & Exporter in India

Explore Titanium Grade 1 Bolts Manufacturer & Exporter in India manufactured for demanding industrial applications with reliable strength, corrosion resistance and compliance with international standards.
Request a Quote
View Products

-250

Min Temp

600

Max Temp

🌡

600

Suitable for continuous service up to approximately 600°C under typical operating conditions.

⚡

900

Typical tensile strength around 900 MPa depending on product form and heat treatment.

🛡

Outstanding

Outstanding corrosion resistance in a wide range of industrial environments.

⚖

4.5

Typical density is approximately 4.5 g/cm³.

Product Overview

What are Titanium Grade 1 Bolts?

Titanium Grade 1 bolts are precision fasteners manufactured from commercially pure titanium (UNS R50250), conforming to ASTM B348 and ASTM F67 standards. As the softest and most ductile of all titanium grades, Grade 1 offers exceptional corrosion resistance, outstanding formability, and a high strength-to-weight ratio, making it ideal for critical bolted joints in aggressive chemical and marine environments.

With a density of just 4.51 g/cm³ and a minimum tensile strength of 240 MPa, Titanium Grade 1 bolts are widely specified for applications where weight savings, biocompatibility, and immunity to chloride-induced corrosion are paramount. All fasteners are supplied with full traceability and EN 10204 3.1 certification.

Quick Specifications

MaterialTitanium Grade 1
UNS NumberR50250
DIN Number3.7025
Material StandardASTM B348 / ASTM F67
Bolt Standard (Metric)DIN 931 / DIN 933 / ISO 4014
Bolt Standard (Inch)ASME B18.2.1
Thread FormISO Metric / UNC / UNF
Diameter RangeM6-M64 / ¼"-2½"
Tensile Strength240 MPa (35 ksi) min
Yield Strength170 MPa (25 ksi) min
HardnessMax 80 HRB / 160 HB
? All material certified by NABL-accredited laboratory. PMI and oxygen content verification available on request.

Complete the Fastener Set

Other Titanium Grade 1 Fastener Products Available from RealBolt

RealBolt also manufactures the complete Titanium Grade 1 fastener range from certified titanium alloy bar stock, including Titanium Grade 1 Nuts, Titanium Grade 1 Screws, Titanium Grade 1 Washers, Titanium Grade 1 Studs, and Titanium Grade 1 Threaded Rods. All Titanium Grade 1 fastener types are produced to ASTM with full EN 10204 MTC 3.1/3.2 documentation.
Titanium Grade 1 Nuts
Titanium Grade 1 Screws
Titanium Grade 1 Washers
Titanium Grade 1 Studs
Titanium Grade 1 Threaded Rods

Technical Data

Titanium Grade 1 Bolts Dimensions, Sizes & Thread Standards

Titanium Grade 1 Bolts are available in metric M6–M100 and inch ¼″–4″ as standard. Per DIN 931 (partial thread) / DIN 933 (full thread) / ISO 4014. Custom lengths in 5mm increments. Inch dimensions available per ASME B18.2.1. All Titanium Grade 1 bolts dimensions conform to applicable DIN, ISO, and ASME B18 standards.

Hex Bolt Dimensions - Metric (DIN 931 / ISO 4014)

Size (M)Pitch (mm)A/F (mm)Head Ht (mm)Min L (mm)Max L (mm)
M61.0104.010200
M81.25135.312250
M101.5176.416300
M121.75197.520400
M162.02410.025500
M202.53012.530600
M243.03615.040600
M303.54618.750800
M364.05522.5601000
M424.56526.0801000
M485.07530.01001200
M565.58535.01201500
M646.09540.01402000

Dimensional & Material Standards

StandardCoversThread
DIN 931Hex bolts, partial threadMetric
DIN 933Hex bolts, full threadMetric
ISO 4014Hex head screws, partialMetric
ISO 4017Hex head screws, fullMetric
ASME B18.2.1Hex & heavy hex boltsUNC/UNF
ASME B16.5Stud bolts for flangesUNC
Material StandardRequirement
ASTM B348Bar/rod - UNS R50250
ASTM F67Unalloyed titanium fasteners
EN 10204 3.1Mill test certificate
EN 10204 3.2TPI-witnessed MTC

Material Chemistry

Titanium Grade 1 Chemical Composition

Titanium Grade 1 Bolts are manufactured from commercially pure or alloyed titanium with elemental limits strictly controlled per ASTM and AMS specifications. Oxygen and nitrogen contents govern strength and ductility in CP grades; aluminium and vanadium additions in Ti-6Al-4V (Grade 5) deliver 896 MPa tensile strength at 4.43 g/cm³ density.

Chemical Composition per ASTM B348

ElementComposition (%)
Titanium (Ti)Balance
Oxygen (O)0.18% max
Carbon (C)0.08% max
Nitrogen (N)0.03% max
Hydrogen (H)0.015% max
Iron (Fe)0.20% max
Other Elements (each)0.10% max
Other Elements (total)0.40% max
? All heats verified by NABL-accredited spectrometry. Oxygen and nitrogen content tested per batch.

Why Titanium Grade 1 Alloy Composition Matters for Bolts

Ultra-Low Interstitials — Ductility & Weldability
The extremely low levels of oxygen, nitrogen, and carbon in Titanium Grade 1 ensure maximum ductility and weldability, making these bolts ideal for critical assemblies and field welding without embrittlement.
Iron Content — Corrosion Resistance
With iron limited to 0.20% max, Titanium Grade 1 bolts exhibit outstanding resistance to general and crevice corrosion in chloride, seawater, and oxidizing acid environments, outperforming stainless steels.
Biocompatibility
The absence of alloying elements and ultra-low impurities make Grade 1 titanium bolts suitable for medical, pharmaceutical, and food processing equipment where biocompatibility is essential.

Fastener Performance

Titanium Grade 1 Bolts Mechanical Properties & Torque Reference

The table below lists mechanical properties and torque reference for Titanium Grade 1 Bolts per ASTM. Titanium Grade 1 bolts achieve 900 MPa tensile strength, with hardness, yield, and elongation values verified by NABL-accredited testing and reported in the EN 10204 MTC.

Bolt SizeDry (Nm)Lubricated (Nm)Clamp Load (kN)
M12322610
M16655218
M2013010428
M2422017641
M3042033666
M3672057695
M421100880135
M4816001280185
?? Anti-galling: Use molybdenum disulfide or PTFE-based anti-seize. Lubricated values assume K=0.18. Avoid copper-based anti-seize to prevent galvanic corrosion in chloride service.

Industry Applications

Titanium Grade 1 Bolts Applications — Industries & End Uses

Titanium Grade 1 Bolts from RealBolt are specified across aerospace, marine, chemical processing, and medical devices where outstanding corrosion resistance and 900 MPa tensile strength are required for reliable fastener performance. Click each industry below for detailed application examples. Select an industry below to see specific Titanium Grade 1 bolts application details and RealBolt stock availability.
Titanium Grade 1 bolts are the preferred choice for heat exchanger tube sheets, reactor closures, and piping flanges in chlorine, hypochlorite, and caustic soda plants due to their unmatched resistance to chloride-induced corrosion and low contamination risk.
Hex bolts and stud bolts for seawater intake structures, evaporators, and brine heaters in desalination plants, as well as marine hardware exposed to full immersion, splash zones, and atmospheric salt spray.
Bolted joints in pharmaceutical reactors, food processing vessels, and clean-in-place (CIP) systems where biocompatibility, non-toxicity, and resistance to cleaning chemicals are critical.
Titanium Grade 1 bolts are used in surgical instruments, orthopedic implant assemblies, and dental equipment for their biocompatibility, non-magnetic properties, and ability to withstand repeated sterilization.

Titanium Grade 1 Bolts Standards & International Certifications

Titanium Grade 1 Bolts from RealBolt Engineering Industries are manufactured to internationally recognised fastener dimensional standards covering thread form, tolerances, strength grades, and quality requirements. Every batch ships with EN 10204 MTC 3.1/3.2, AMS material certification, AS 9100D traceability for aerospace grades, and NABL lab reports — available on request for all orders.
Standards
DIN 931 DIN 933 DIN 912 ISO 4014 ISO 4017 ISO 4762 ASME B18.2.1 ASME B18.3 IS 1367
Certifications
ISO 9001:2015PED 2014/68/EUNABL LabEN 10204 3.1 / 3.2

Buy Titanium Grade 1 Bolts from India's Leading Manufacturer — Get a Competitive Quote Today

Partner with RealBolt — India’s leading manufacturer of certified Titanium Grade 1 Bolts — for competitive pricing, EN 10204 MTC 3.1/3.2 documentation, and fast Mumbai dispatch. Standard sizes are ex-stock; custom dimensions accepted with 2–3 week lead time. Request your quote today.
022-6743-7972
+91 90226 36025
Email Us

Answers for Buyers

Titanium Grade 1 Bolts — Frequently Asked Questions

Browse expert answers to common questions about Titanium Grade 1 Bolts from RealBolt — covering grade selection, ASTM B348/F467, seawater immunity, weight saving, galling precautions, and certification. Contact our technical team directly for project-specific guidance on Titanium Grade 1 bolts selection and pricing.
Titanium Grade 1 bolts are available to DIN 931 (metric partial thread), DIN 933 (metric full thread), ISO 4014/4017, and ASME B18.2.1 (inch hex and heavy hex). Stud bolts for flanges are supplied per ASME B16.5. Custom thread forms (BSW, BSF, Whitworth, BSPP) and special lengths are available on request.
Molybdenum disulfide or PTFE-based anti-seize is recommended for Titanium Grade 1 bolts to prevent galling and seizing. Avoid copper-based anti-seize in chloride or seawater service to prevent galvanic corrosion. Apply to threads and bearing surfaces; reduce torque by 20% for lubricated assembly.
Yes – Titanium Grade 1 bolts are completely resistant to pitting, crevice, and stress corrosion in seawater, brine, and most oxidizing acids. They are the industry standard for desalination, marine, and chemical plant bolting where stainless steel fails. No coating or cathodic protection is required.
No MOQ for standard sizes (M6-M24) held in stock – single pieces can be supplied for urgent repairs. Custom sizes or non-standard threads have a 5 kg minimum. Flange stud bolt sets are supplied per set with no minimum. Price breaks at 50, 200, and 500 pieces.

Industrial Cities We Serve:

  • Ahmedabad
  • Aurangabad
  • Bengaluru
  • Chennai
  • Coimbatore
  • Faridabad
  • Gandhidham
  • Greater Noida
  • Gurugram
  • Hazira
  • Hosur
  • Hyderabad
  • Jamnagar
  • Jamshedpur
  • Ludhiana
  • Mumbai
  • Mundra
  • Mysuru
  • Nagpur
  • Nashik
  • Navi Mumbai
  • Noida
  • Pune
  • Rajkot
  • Sanand
  • Surat
  • Thane
  • Tiruppur
  • Vadodara
  • Visakhapatnam

Countries We Export To:

  • US
  • Canada
  • Mexico
  • Germany
  • UK
  • France
  • Italy
  • Spain
  • Netherlands
  • Belgium
  • Poland
  • Sweden
  • Norway
  • Denmark
  • Turkey
  • UAE
  • Saudi Arabia
  • Qatar
  • Oman
  • Kuwait
  • Bahrain
  • South Africa
  • Egypt
  • Nigeria
  • Australia
  • New Zealand
  • Singapore
  • Malaysia
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Brazil