+912267437972

+919022636025

enquiry@real-bolt.com

Contact Us

Titanium Grade 4 Washers Manufacturer & Exporter in India

Explore Titanium Grade 4 Washers Manufacturer & Exporter in India manufactured for demanding industrial applications with reliable strength, corrosion resistance and compliance with international standards.
Request a Quote
View Products

-250

Min Temp

600

Max Temp

🌡

600

Suitable for continuous service up to approximately 600°C under typical operating conditions.

⚡

900

Typical tensile strength around 900 MPa depending on product form and heat treatment.

🛡

Outstanding

Outstanding corrosion resistance in a wide range of industrial environments.

⚖

4.5

Typical density is approximately 4.5 g/cm³.

Product Overview

What are Titanium Grade 4 Washers?

Titanium Grade 4 washers are high-strength, commercially pure titanium fastener components manufactured from UNS R50700 material, conforming to ASTM B265 and ASTM F67 standards. Grade 4 is the strongest of the commercially pure titanium grades, offering superior mechanical properties and excellent corrosion resistance in oxidizing and chloride-rich environments.

These washers are widely specified for critical bolted joints in chemical processing, marine, medical, and aerospace applications where both high strength and biocompatibility are required. Titanium Grade 4 washers are non-magnetic, lightweight, and maintain their integrity in aggressive environments where stainless steel or lower grades of titanium may fail.

Quick Specifications

MaterialTitanium Grade 4
UNS NumberR50700
DIN Number3.7065
Material StandardASTM B265 / ASTM F67
Washer Standard (Metric)DIN 125 / DIN 127 / ISO 7089
Washer Standard (Inch)ASME B18.22.1
TypeFlat, Spring, Lock, Tab, Fender
Diameter RangeM3-M64 / 1/8"-2.5"
Tensile Strength550 MPa (80 ksi) min
Yield Strength483 MPa (70 ksi) min
HardnessMax 230 HV
? All washers supplied with full traceability and laboratory certification. PMI and ultrasonic testing available on request.

Complete the Fastener Set

Other Titanium Grade 4 Fastener Products Available from RealBolt

RealBolt also manufactures the complete Titanium Grade 4 fastener range from certified titanium alloy bar stock, including Titanium Grade 4 Bolts, Titanium Grade 4 Nuts, Titanium Grade 4 Screws, Titanium Grade 4 Studs, and Titanium Grade 4 Threaded Rods. All Titanium Grade 4 fastener types are produced to ASTM with full EN 10204 MTC 3.1/3.2 documentation.
Titanium Grade 4 Bolts
Titanium Grade 4 Nuts
Titanium Grade 4 Screws
Titanium Grade 4 Studs
Titanium Grade 4 Threaded Rods

Technical Data

Titanium Grade 4 Washers Dimensions, Sizes & Thread Standards

Titanium Grade 4 Washers are available in metric M6–M100 and inch ¼″–4″ as standard. Per DIN 125 (flat), DIN 127 (spring), ISO 7089 (plain), and ASME B18.22.1 (inch). Custom OD/ID and thickness available. Metric and inch sizes supplied. All Titanium Grade 4 washers dimensions conform to applicable DIN, ISO, and ASME B18 standards.

Flat Washer Dimensions - Metric (DIN 125 / ISO 7089)

Size (M)Inner Ø (mm)Outer Ø (mm)Thickness (mm)
M33.270.5
M66.4121.6
M88.4161.6
M1010.5202.0
M1213.0242.5
M1617.0303.0
M2021.0373.0
M2425.0444.0
M3031.0564.0
M3637.0665.0
M4243.0786.0
M4849.0926.0
M5657.01058.0
M6465.01158.0

Dimensional & Material Standards

StandardCoversType
DIN 125Flat washersMetric
DIN 127Spring lock washersMetric
ISO 7089Plain washersMetric
ASME B18.22.1Plain & lock washersInch
ISO 7090Chamfered washersMetric
Material StandardRequirement
ASTM B265Plate/strip - UNS R50700
ASTM F67Unalloyed titanium fasteners
ISO 5832-2Surgical implant grade
EN 10204 3.1Mill test certificate
EN 10204 3.2TPI-witnessed MTC

Material Chemistry

Titanium Grade 4 Chemical Composition

Titanium Grade 4 Washers are manufactured from commercially pure or alloyed titanium with elemental limits strictly controlled per ASTM and AMS specifications. Oxygen and nitrogen contents govern strength and ductility in CP grades; aluminium and vanadium additions in Ti-6Al-4V (Grade 5) deliver 896 MPa tensile strength at 4.43 g/cm³ density.

Chemical Composition per ASTM B265 / F67

ElementComposition (%)
Titanium (Ti)Balance
Oxygen (O)0.40% max
Iron (Fe)0.50% max
Carbon (C)0.08% max
Nitrogen (N)0.05% max
Hydrogen (H)0.015% max
Other Elements (each)0.10% max
Other Elements (total)0.40% max
? All heats spectro-tested and certified by NABL-accredited laboratory. Full traceability provided.

Why Titanium Grade 4 Alloy Composition Matters for Washers

High Oxygen Content — Strength
Grade 4 titanium’s higher oxygen content (up to 0.40%) delivers the highest strength among commercially pure grades, making these washers ideal for high-load and high-pressure bolted joints.
Low Iron & Carbon — Corrosion Resistance
Strict limits on iron and carbon ensure maximum resistance to crevice and pitting corrosion, even in aggressive chloride and oxidizing environments such as seawater and chemical process lines.
Biocompatibility
The absence of alloying elements and low interstitials make Grade 4 titanium washers suitable for medical, dental, and food-contact applications where biocompatibility is critical.

Fastener Performance

Titanium Grade 4 Washers Mechanical Properties & Torque & Proof Load Reference

The table below lists mechanical properties and proof load reference for Titanium Grade 4 Washers per ASTM. Titanium Grade 4 washers achieve 900 MPa tensile strength, with hardness, yield, and elongation values verified by NABL-accredited testing and reported in the EN 10204 MTC.

Washer SizeRecommended Bolt SizeMax Load (kN)
M6M613
M10M1029
M16M1662
M20M2097
M24M24140
M30M30220
M36M36320
?? Installation: Use clean, dry surfaces. For dynamic or high-vibration joints, consider spring or lock washer types for optimal load retention.

Industry Applications

Titanium Grade 4 Washers Applications — Industries & End Uses

Titanium Grade 4 Washers from RealBolt are specified across aerospace, marine, chemical processing, and medical devices where outstanding corrosion resistance and 900 MPa tensile strength are required for reliable fastener performance. Click each industry below for detailed application examples. Select an industry below to see specific Titanium Grade 4 washers application details and RealBolt stock availability.
Titanium Grade 4 washers are specified for bolted joints in heat exchangers, pressure vessels, and piping systems handling chlor-alkali, nitric acid, and other aggressive chemicals. Their high strength and corrosion resistance prevent crevice corrosion and washer deformation under load.
Used in seawater-cooled heat exchangers, hull penetrations, and underwater structures, these washers provide long-term resistance to pitting and crevice corrosion in marine atmospheres and direct seawater immersion.
Titanium Grade 4 washers are biocompatible and non-magnetic, making them ideal for surgical instruments, implantable devices, and MRI-compatible assemblies where both strength and tissue compatibility are essential.
Specified for airframe assemblies, engine mounts, and landing gear where lightweight, high-strength, and corrosion-resistant washers are required. Grade 4 titanium meets AMS 4901 and ISO 5832-2 for aerospace and medical use.

Titanium Grade 4 Washers Standards & International Certifications

Titanium Grade 4 Washers from RealBolt Engineering Industries are manufactured to internationally recognised fastener dimensional standards covering thread form, tolerances, strength grades, and quality requirements. Every batch ships with EN 10204 MTC 3.1/3.2, AMS material certification, AS 9100D traceability for aerospace grades, and NABL lab reports — available on request for all orders.
Standards
DIN 125A DIN 127 ISO 7089 ISO 7090 ASME B18.21.1 IS 1367
Certifications
ISO 9001:2015PED 2014/68/EUNABL LabMTC 3.1 / 3.2CE Marking

Buy Titanium Grade 4 Washers from India's Leading Manufacturer — Get a Competitive Quote Today

Partner with RealBolt — India’s leading manufacturer of certified Titanium Grade 4 Washers — for competitive pricing, EN 10204 MTC 3.1/3.2 documentation, and fast Mumbai dispatch. Standard sizes are ex-stock; custom dimensions accepted with 2–3 week lead time. Request your quote today.
022-6743-7972
+91 90226 36025
Email Us

Answers for Buyers

Titanium Grade 4 Washers — Frequently Asked Questions

Browse expert answers to common questions about Titanium Grade 4 Washers from RealBolt — covering grade selection, ASTM B348/F467, seawater immunity, weight saving, galling precautions, and certification. Contact our technical team directly for project-specific guidance on Titanium Grade 4 washers selection and pricing.
Titanium Grade 4 washers are available to DIN 125 (flat), DIN 127 (spring), ISO 7089 (plain), ISO 7090 (chamfered), and ASME B18.22.1 (inch). Custom OD, ID, and thickness can be supplied to drawing or special standards. Medical and aerospace washers are available to ISO 5832-2 and AMS 4901.
Titanium Grade 4 washers offer outstanding resistance to pitting, crevice, and stress corrosion in seawater and chloride-rich environments. They are the preferred choice for marine, desalination, and offshore applications where stainless steel washers may fail due to localized corrosion.
Yes – Titanium Grade 4 is biocompatible, non-toxic, and non-magnetic, making these washers ideal for medical, dental, and food-processing equipment. They comply with ISO 5832-2 and ASTM F67 for surgical and implantable applications.
Standard metric and inch sizes are available ex-stock with no MOQ – single pieces can be supplied for urgent requirements. Custom sizes or special washer types may require a minimum order of 10 kg or 100 pieces, depending on dimensions and complexity.

Industrial Cities We Serve:

  • Ahmedabad
  • Aurangabad
  • Bengaluru
  • Chennai
  • Coimbatore
  • Faridabad
  • Gandhidham
  • Greater Noida
  • Gurugram
  • Hazira
  • Hosur
  • Hyderabad
  • Jamnagar
  • Jamshedpur
  • Ludhiana
  • Mumbai
  • Mundra
  • Mysuru
  • Nagpur
  • Nashik
  • Navi Mumbai
  • Noida
  • Pune
  • Rajkot
  • Sanand
  • Surat
  • Thane
  • Tiruppur
  • Vadodara
  • Visakhapatnam

Countries We Export To:

  • US
  • Canada
  • Mexico
  • Germany
  • UK
  • France
  • Italy
  • Spain
  • Netherlands
  • Belgium
  • Poland
  • Sweden
  • Norway
  • Denmark
  • Turkey
  • UAE
  • Saudi Arabia
  • Qatar
  • Oman
  • Kuwait
  • Bahrain
  • South Africa
  • Egypt
  • Nigeria
  • Australia
  • New Zealand
  • Singapore
  • Malaysia
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Brazil