+912267437972

+919022636025

enquiry@real-bolt.com

Contact Us

DIN 125A Form A Flat Washers – Manufacturer, Exporter & Supplier

We manufacture and export DIN 125A Form A Flat Washers conforming to exact DIN 125A dimensional and mechanical specifications. Available in 140 HV / A2 / A4 / Brass / Cu, our DIN 125A flat washers pass rigorous in-house testing — hardness, tensile and dimensional — before dispatch. ISO 9001:2015 certified production, EN 10204 3.1 mill test reports supplied as standard, and dedicated export documentation for 50+ destination countries.
Request a Quote
View Standards

DIN 125A Key Specifications

The core specification data for DIN 125A Form A Flat Washers, at a glance.

Standard

DIN 125A

Type

Form A Flat Washers

Size Range

M1.6 to M100

Thread Pitch

—

Property Class / Grade

140 HV / A2 / A4 / Brass / Cu

Head / Drive Type

Flat / Round

About DIN 125A Form A Flat Washers

DIN 125A Form A Flat Washers are flat washers produced and tested to the exact requirements of the DIN 125A specification. Featuring a Flat / Round configuration with — thread form, they are available in property classes 140 HV / A2 / A4 / Brass / Cu across a size range of M1.6 to M100. The DIN 125A standard governs dimensional tolerances, mechanical properties including tensile strength, proof load and hardness, as well as surface finish requirements to ensure dependable performance in Structural Steel and General Engineering applications worldwide.
Our DIN 125A Form A Flat Washers are cold-forged from certified bar stock, heat-treated where required, and thread-rolled to guarantee consistent fit and fatigue performance. Every batch is documented with an EN 10204 3.1 Mill Test Report covering chemical composition, mechanical test results and dimensional inspection. Available in zinc electroplated, hot-dip galvanised, Geomet, Dacromet and black oxide finishes to match corrosion-resistance requirements for Construction, Machinery and Railways applications. As a global exporter of DIN 125A fasteners, we consolidate orders with other standard-specification items into single shipments, backed by complete customs documentation for over 50 countries.
Technical Specifications

Raw Material

140 HV Alloy / Stainless Steel

Country of Origin

India

Standard Body

DIN

Corrosion Resistance

Salt-spray tested to relevant grade

Recommended Torque

Per property class / grade

Storage Conditions

Dry, corrosion-inhibited packing

DIN 125A Dimensions & Size Chart

Precise dimensional data for every DIN 125A Form A Flat Washers size, cross-referenced against the standard’s key measurement points.
Nom. Sized1 min (mm)d2 max (mm)h (mm)
M33.27.00.5
M44.39.00.8
M55.310.01.0
M66.412.01.6
M88.416.01.6
M1010.520.02.0
M1213.024.02.5
M1617.030.03.0
M2021.037.03.0
M2425.044.04.0
M3031.056.04.0
M3637.066.05.0
Key Dimension Callouts

d1

Inside hole diameter clearing the mating screw thread.

d2

Outside washer diameter spanning the bearing surface.

h

Washer thickness between parallel bearing faces.

d

Nominal screw thread size the washer fits.

Explore Additional DIN Fastener Standards and Technical Specifications

Additional DIN fastener standards cover bolts, screws, nuts, washers, stud bolts, threaded rods, dimensions, tolerances, thread specifications, material grades and mechanical properties for diverse industrial applications. Compare related DIN engineering specifications and manufacturing standards to verify quality requirements, improve procurement accuracy and select the correct mechanical fastening specification for your project.
DIN 84
DIN 85
DIN 126
DIN 127
DIN 128
DIN 315
DIN 433
DIN 434
DIN 436
DIN 439
DIN 440
DIN 557
DIN 562
DIN 603
DIN 608
DIN 609
DIN 610
DIN 6912
DIN 6914
DIN 6921
DIN 6923
DIN 7984
DIN 7985
DIN 7990
DIN 7991
DIN 9021
DIN 912
DIN 913
DIN 914
DIN 915
DIN 916
DIN 928
DIN 929
DIN 931
DIN 933
DIN 934
DIN 935
DIN 936
DIN 937
DIN 938
DIN 939
DIN 940
DIN 960
DIN 961
DIN 965
DIN 966
DIN 967
DIN 975
DIN 976-1
DIN 980
DIN 982
DIN 985
DIN 1587
DIN 6796
DIN 6797

DIN 125A Form A Flat Washers – Material Grades & Property Classes

DIN 125A Form A Flat Washers are available across multiple property classes and surface finish options to match load-bearing and corrosion-resistance requirements for Structural Steel, General Engineering and Construction applications.
Property Classes
140 HV A2 A4 Brass Cu
Surface Treatments
Zinc Electroplated Hot-Dip Galvanised (HDG) Geomet Coating Dacromet Coating Black Oxide Phosphate & Oil Plain (Self Colour) Nickel Plated

Why Choose Us for DIN 125A Form A Flat Washers?

Nine reasons buyers worldwide rely on us as their DIN 125A Form A Flat Washers manufacturer and export partner.
ISO Certified Production

Every batch of DIN 125A Form A Flat Washers is manufactured under an ISO 9001:2015 certified quality management system with full in-process control.

EN 10204 3.1 MTR Supplied

A mill test report covering chemical composition, tensile, hardness and dimensional inspection accompanies every DIN 125A Form A Flat Washers shipment.

48-hr Dispatch on Stock Items

Commonly stocked DIN 125A Form A Flat Washers sizes leave our warehouse within 48 hours of order confirmation, minimising your downtime.

Export to 50+ Countries

Established freight and customs partners ensure reliable delivery of DIN 125A Form A Flat Washers to buyers in over 50 countries worldwide.

Custom Sizes & Lengths

Non-standard DIN 125A Form A Flat Washers lengths, diameters and special thread pitches are produced to order to match your drawing requirements.

Competitive Factory Pricing

Direct-from-factory pricing on DIN 125A Form A Flat Washers with no middleman markup, offering the best value on volume and repeat orders.

In-House Metallurgical Testing

Hardness, tensile strength and dimensional checks for DIN 125A Form A Flat Washers are performed in our in-house laboratory before every release.

Consolidated Multi-Standard Shipping

Combine DIN 125A Form A Flat Washers with other standard-specification fasteners into a single container shipment to reduce freight costs.

Dedicated Export Documentation Team

Our specialist team prepares all customs, compliance and shipping paperwork for every DIN 125A Form A Flat Washers export order.

DIN 125A Form A Flat Washers – Applications & End Uses

DIN 125A Form A Flat Washers are widely specified across multiple industries. Select an industry below to see how our DIN 125A flat washers are applied.
DIN 125A Form A Flat Washers are used in structural steel for critical fastening applications where dimensional accuracy and mechanical performance are essential. Grade 140 HV is most commonly specified for structural steel environments.
In general engineering, DIN 125A Form A Flat Washers are valued for consistent dimensions and reliable load-bearing capability. We supply with full test documentation to support quality audits and project inspections.
DIN 125A Form A Flat Washers are used in construction assemblies where precise torque control and consistent fit are critical. We supply to OEM manufacturers and contractors with custom packaging formats.
For machinery applications, DIN 125A Form A Flat Washers are supplied with material test reports, dimensional inspection certificates and PPAP documentation where required.
DIN 125A Form A Flat Washers for railways use are selected from stainless steel or coated grades to provide appropriate corrosion resistance while maintaining specified mechanical performance.
In general engineering applications, DIN 125A Form A Flat Washers are fastened into assemblies requiring long-term reliability. Our export-packaged DIN 125A flat washers arrive protected from transit corrosion with full documentation.

Request a Quote for DIN 125A Form A Flat Washers

Get pricing and lead times for your required sizes and quantities. ISO 9001 certified. EN 10204 3.1 MTR supplied. Export to 50+ countries.
022-6743-7972
+91 90226 36025
Email Us

Frequently Asked Questions About DIN 125A

Common questions from buyers sourcing DIN 125A Form A Flat Washers, covering sizes, grades, documentation and lead times.
We supply DIN 125A Form A Flat Washers from M1.6 to M100 in — thread. Standard lengths are stocked; non-standard lengths are produced to order. Contact us with your exact requirements for availability confirmation.
DIN 125A Form A Flat Washers are supplied in 140 HV / A2 / A4 / Brass / Cu. Carbon and alloy steel grades comply with ISO 898-1 and stainless steel grades comply with ISO 3506. ASTM grades are available for USA and Canadian export orders.
Every DIN 125A Form A Flat Washers order includes an EN 10204 3.1 Mill Test Report covering chemical composition, tensile strength, hardness and proof load. Third-party inspection by SGS, BV or TUV can be arranged on request.
Stocked DIN 125A Form A Flat Washers sizes dispatch within 48 hours of order confirmation. Custom lengths, special grades or surface finishes typically ship within 2-3 weeks. Contact us for a specific lead time on your required size and quantity.

Industrial Cities We Serve:

  • Ahmedabad
  • Aurangabad
  • Bengaluru
  • Chennai
  • Coimbatore
  • Faridabad
  • Gandhidham
  • Greater Noida
  • Gurugram
  • Hazira
  • Hosur
  • Hyderabad
  • Jamnagar
  • Jamshedpur
  • Ludhiana
  • Mumbai
  • Mundra
  • Mysuru
  • Nagpur
  • Nashik
  • Navi Mumbai
  • Noida
  • Pune
  • Rajkot
  • Sanand
  • Surat
  • Thane
  • Tiruppur
  • Vadodara
  • Visakhapatnam

Countries We Export To:

  • US
  • Canada
  • Mexico
  • Germany
  • UK
  • France
  • Italy
  • Spain
  • Netherlands
  • Belgium
  • Poland
  • Sweden
  • Norway
  • Denmark
  • Turkey
  • UAE
  • Saudi Arabia
  • Qatar
  • Oman
  • Kuwait
  • Bahrain
  • South Africa
  • Egypt
  • Nigeria
  • Australia
  • New Zealand
  • Singapore
  • Malaysia
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Brazil