+912267437972

+919022636025

enquiry@real-bolt.com

Contact Us

DIN 436 Square Taper Washers for I-Section (I-Beams) – Manufacturer, Exporter & Supplier

We manufacture and export DIN 436 Square Taper Washers for I-Section (I-Beams) conforming to exact DIN 436 dimensional and mechanical specifications. Available in 140 HV / A2, our DIN 436 taper washers pass rigorous in-house testing — hardness, tensile and dimensional — before dispatch. ISO 9001:2015 certified production, EN 10204 3.1 mill test reports supplied as standard, and dedicated export documentation for 50+ destination countries.
Request a Quote
View Standards

DIN 436 Key Specifications

The core specification data for DIN 436 Square Taper Washers for I-Section (I-Beams), at a glance.

Standard

DIN 436

Type

Square Taper Washers for I-Section (I-Beams)

Size Range

M8 to M36

Thread Pitch

—

Property Class / Grade

140 HV / A2

Head / Drive Type

Square Taper 14%

About DIN 436 Square Taper Washers for I-Section (I-Beams)

DIN 436 Square Taper Washers for I-Section (I-Beams) are taper washers produced and tested to the exact requirements of the DIN 436 specification. Featuring a Square Taper 14% configuration with — thread form, they are available in property classes 140 HV / A2 across a size range of M8 to M36. The DIN 436 standard governs dimensional tolerances, mechanical properties including tensile strength, proof load and hardness, as well as surface finish requirements to ensure dependable performance in Steel Construction and Bridge Engineering applications worldwide.
Our DIN 436 Square Taper Washers for I-Section (I-Beams) are cold-forged from certified bar stock, heat-treated where required, and thread-rolled to guarantee consistent fit and fatigue performance. Every batch is documented with an EN 10204 3.1 Mill Test Report covering chemical composition, mechanical test results and dimensional inspection. Available in zinc electroplated, hot-dip galvanised, Geomet, Dacromet and black oxide finishes to match corrosion-resistance requirements for Heavy Structural Work, Industrial Buildings and General Engineering applications. As a global exporter of DIN 436 fasteners, we consolidate orders with other standard-specification items into single shipments, backed by complete customs documentation for over 50 countries.
Technical Specifications

Raw Material

140 HV Alloy / Stainless Steel

Country of Origin

India

Standard Body

DIN

Corrosion Resistance

Salt-spray tested to relevant grade

Recommended Torque

Per property class / grade

Storage Conditions

Dry, corrosion-inhibited packing

DIN 436 Dimensions & Size Chart

Precise dimensional data for every DIN 436 Square Taper Washers for I-Section (I-Beams) size, cross-referenced against the standard’s key measurement points.
Nom. Sizea (mm)b (mm)c (mm)s1 (mm)s2 (mm)
M822229.03.51.9
M102626114.52.3
M123030135.52.6
M163838186.53.2
M204646227.53.7
M245454269.04.5
M30666633105.0
M36787839125.8
Key Dimension Callouts

d

Nominal bolt size intended for washer application.

d1

Central hole diameter providing bolt clearance.

a

Square outside side length across washer edges.

h

Washer thickness measured between flat bearing faces.

Browse Related DIN Fastener Standards and Washer Dimensions

Additional DIN fastener standards help engineers and buyers compare bolts, screws, nuts, washers, stud bolts, and threaded rods by dimensions, tolerances, thread specifications, mechanical properties, and material grades. Explore the wider DIN standards family to match engineering specifications, manufacturing standards, quality requirements, and industrial applications with the correct fastener specification.
DIN 84
DIN 85
DIN 125A
DIN 126
DIN 127
DIN 128
DIN 315
DIN 433
DIN 434
DIN 439
DIN 440
DIN 557
DIN 562
DIN 603
DIN 608
DIN 609
DIN 610
DIN 6912
DIN 6914
DIN 6921
DIN 6923
DIN 7984
DIN 7985
DIN 7990
DIN 7991
DIN 9021
DIN 912
DIN 913
DIN 914
DIN 915
DIN 916
DIN 928
DIN 929
DIN 931
DIN 933
DIN 934
DIN 935
DIN 936
DIN 937
DIN 938
DIN 939
DIN 940
DIN 960
DIN 961
DIN 965
DIN 966
DIN 967
DIN 975
DIN 976-1
DIN 980
DIN 982
DIN 985
DIN 1587
DIN 6796
DIN 6797

DIN 436 Square Taper Washers for I-Section (I-Beams) – Material Grades & Property Classes

DIN 436 Square Taper Washers for I-Section (I-Beams) are available across multiple property classes and surface finish options to match load-bearing and corrosion-resistance requirements for Steel Construction, Bridge Engineering and Heavy Structural Work applications.
Property Classes
140 HV A2
Surface Treatments
Zinc Electroplated Hot-Dip Galvanised (HDG) Geomet Coating Dacromet Coating Black Oxide Phosphate & Oil Plain (Self Colour) Nickel Plated

Why Choose Us for DIN 436 Square Taper Washers for I-Section (I-Beams)?

Nine reasons buyers worldwide rely on us as their DIN 436 Square Taper Washers for I-Section (I-Beams) manufacturer and export partner.
ISO Certified Production

Every batch of DIN 436 Square Taper Washers for I-Section (I-Beams) is manufactured under an ISO 9001:2015 certified quality management system with full in-process control.

EN 10204 3.1 MTR Supplied

A mill test report covering chemical composition, tensile, hardness and dimensional inspection accompanies every DIN 436 Square Taper Washers for I-Section (I-Beams) shipment.

48-hr Dispatch on Stock Items

Commonly stocked DIN 436 Square Taper Washers for I-Section (I-Beams) sizes leave our warehouse within 48 hours of order confirmation, minimising your downtime.

Export to 50+ Countries

Established freight and customs partners ensure reliable delivery of DIN 436 Square Taper Washers for I-Section (I-Beams) to buyers in over 50 countries worldwide.

Custom Sizes & Lengths

Non-standard DIN 436 Square Taper Washers for I-Section (I-Beams) lengths, diameters and special thread pitches are produced to order to match your drawing requirements.

Competitive Factory Pricing

Direct-from-factory pricing on DIN 436 Square Taper Washers for I-Section (I-Beams) with no middleman markup, offering the best value on volume and repeat orders.

In-House Metallurgical Testing

Hardness, tensile strength and dimensional checks for DIN 436 Square Taper Washers for I-Section (I-Beams) are performed in our in-house laboratory before every release.

Consolidated Multi-Standard Shipping

Combine DIN 436 Square Taper Washers for I-Section (I-Beams) with other standard-specification fasteners into a single container shipment to reduce freight costs.

Dedicated Export Documentation Team

Our specialist team prepares all customs, compliance and shipping paperwork for every DIN 436 Square Taper Washers for I-Section (I-Beams) export order.

DIN 436 Square Taper Washers for I-Section (I-Beams) – Applications & End Uses

DIN 436 Square Taper Washers for I-Section (I-Beams) are widely specified across multiple industries. Select an industry below to see how our DIN 436 taper washers are applied.
DIN 436 Square Taper Washers for I-Section (I-Beams) are used in steel construction for critical fastening applications where dimensional accuracy and mechanical performance are essential. Grade 140 HV is most commonly specified for steel construction environments.
In bridge engineering, DIN 436 Square Taper Washers for I-Section (I-Beams) are valued for consistent dimensions and reliable load-bearing capability. We supply with full test documentation to support quality audits and project inspections.
DIN 436 Square Taper Washers for I-Section (I-Beams) are used in heavy structural work assemblies where precise torque control and consistent fit are critical. We supply to OEM manufacturers and contractors with custom packaging formats.
For industrial buildings applications, DIN 436 Square Taper Washers for I-Section (I-Beams) are supplied with material test reports, dimensional inspection certificates and PPAP documentation where required.
DIN 436 Square Taper Washers for I-Section (I-Beams) for general engineering use are selected from stainless steel or coated grades to provide appropriate corrosion resistance while maintaining specified mechanical performance.
In general engineering applications, DIN 436 Square Taper Washers for I-Section (I-Beams) are fastened into assemblies requiring long-term reliability. Our export-packaged DIN 436 taper washers arrive protected from transit corrosion with full documentation.

Request a Quote for DIN 436 Square Taper Washers for I-Section (I-Beams)

Get pricing and lead times for your required sizes and quantities. ISO 9001 certified. EN 10204 3.1 MTR supplied. Export to 50+ countries.
022-6743-7972
+91 90226 36025
Email Us

Frequently Asked Questions About DIN 436

Common questions from buyers sourcing DIN 436 Square Taper Washers for I-Section (I-Beams), covering sizes, grades, documentation and lead times.
We supply DIN 436 Square Taper Washers for I-Section (I-Beams) from M8 to M36 in — thread. Standard lengths are stocked; non-standard lengths are produced to order. Contact us with your exact requirements for availability confirmation.
DIN 436 Square Taper Washers for I-Section (I-Beams) are supplied in 140 HV / A2. Carbon and alloy steel grades comply with ISO 898-1 and stainless steel grades comply with ISO 3506. ASTM grades are available for USA and Canadian export orders.
Every DIN 436 Square Taper Washers for I-Section (I-Beams) order includes an EN 10204 3.1 Mill Test Report covering chemical composition, tensile strength, hardness and proof load. Third-party inspection by SGS, BV or TUV can be arranged on request.
Stocked DIN 436 Square Taper Washers for I-Section (I-Beams) sizes dispatch within 48 hours of order confirmation. Custom lengths, special grades or surface finishes typically ship within 2-3 weeks. Contact us for a specific lead time on your required size and quantity.

Industrial Cities We Serve:

  • Ahmedabad
  • Aurangabad
  • Bengaluru
  • Chennai
  • Coimbatore
  • Faridabad
  • Gandhidham
  • Greater Noida
  • Gurugram
  • Hazira
  • Hosur
  • Hyderabad
  • Jamnagar
  • Jamshedpur
  • Ludhiana
  • Mumbai
  • Mundra
  • Mysuru
  • Nagpur
  • Nashik
  • Navi Mumbai
  • Noida
  • Pune
  • Rajkot
  • Sanand
  • Surat
  • Thane
  • Tiruppur
  • Vadodara
  • Visakhapatnam

Countries We Export To:

  • US
  • Canada
  • Mexico
  • Germany
  • UK
  • France
  • Italy
  • Spain
  • Netherlands
  • Belgium
  • Poland
  • Sweden
  • Norway
  • Denmark
  • Turkey
  • UAE
  • Saudi Arabia
  • Qatar
  • Oman
  • Kuwait
  • Bahrain
  • South Africa
  • Egypt
  • Nigeria
  • Australia
  • New Zealand
  • Singapore
  • Malaysia
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Brazil