DIN 7985
Cross Recessed (Phillips) Pan Head Machine Screws
M1.6 to M10
Coarse
4.8 / A2-70 / A4-70 / Brass
Phillips / Pan Head
4.8 Alloy / Stainless Steel
India
DIN
Salt-spray tested to relevant grade
Per property class / grade
Dry, corrosion-inhibited packing
| Size (M) | dk (mm) | k (mm) | f (mm) | L Range (mm) |
|---|---|---|---|---|
| M1.6 | 3.2 | 1.3 | 1 | 3–16 |
| M2 | 4.0 | 1.6 | 1 | 3–20 |
| M2.5 | 5.0 | 2.1 | 1 | 4–25 |
| M3 | 5.6 | 2.4 | 1 | 4–30 |
| M4 | 8.0 | 3.1 | 2 | 5–40 |
| M5 | 9.5 | 3.7 | 2 | 6–50 |
| M6 | 12.0 | 4.6 | 2 | 8–60 |
| M8 | 16.0 | 6.0 | 3 | 10–80 |
| M10 | 20.0 | 7.5 | 3 | 12–100 |
Nominal thread diameter measured across the major thread.
Screw length measured from bearing surface to tip.
Head diameter measured across the pan head.
Head height from bearing surface to head crown.
Every batch of DIN 7985 Cross Recessed (Phillips) Pan Head Machine Screws is manufactured under an ISO 9001:2015 certified quality management system with full in-process control.
A mill test report covering chemical composition, tensile, hardness and dimensional inspection accompanies every DIN 7985 Cross Recessed (Phillips) Pan Head Machine Screws shipment.
Commonly stocked DIN 7985 Cross Recessed (Phillips) Pan Head Machine Screws sizes leave our warehouse within 48 hours of order confirmation, minimising your downtime.
Established freight and customs partners ensure reliable delivery of DIN 7985 Cross Recessed (Phillips) Pan Head Machine Screws to buyers in over 50 countries worldwide.
Non-standard DIN 7985 Cross Recessed (Phillips) Pan Head Machine Screws lengths, diameters and special thread pitches are produced to order to match your drawing requirements.
Direct-from-factory pricing on DIN 7985 Cross Recessed (Phillips) Pan Head Machine Screws with no middleman markup, offering the best value on volume and repeat orders.
Hardness, tensile strength and dimensional checks for DIN 7985 Cross Recessed (Phillips) Pan Head Machine Screws are performed in our in-house laboratory before every release.
Combine DIN 7985 Cross Recessed (Phillips) Pan Head Machine Screws with other standard-specification fasteners into a single container shipment to reduce freight costs.
Our specialist team prepares all customs, compliance and shipping paperwork for every DIN 7985 Cross Recessed (Phillips) Pan Head Machine Screws export order.
