+912267437972

+919022636025

enquiry@real-bolt.com

Contact Us

DIN 938 Studs – One End (Metal End) Screwing Into Component – Manufacturer, Exporter & Supplier

We manufacture and export DIN 938 Studs – One End (Metal End) Screwing Into Component conforming to exact DIN 938 dimensional and mechanical specifications. Available in 5.8 / 8.8 / 10.9 / A2-70 / A4-70, our DIN 938 stud bolts pass rigorous in-house testing — hardness, tensile and dimensional — before dispatch. ISO 9001:2015 certified production, EN 10204 3.1 mill test reports supplied as standard, and dedicated export documentation for 50+ destination countries.
Request a Quote
View Standards

DIN 938 Key Specifications

The core specification data for DIN 938 Studs – One End (Metal End) Screwing Into Component, at a glance.

Standard

DIN 938

Type

Studs – One End (Metal End) Screwing Into Component

Size Range

M4 to M52

Thread Pitch

Coarse & Fine

Property Class / Grade

5.8 / 8.8 / 10.9 / A2-70 / A4-70

Head / Drive Type

Stud – One End

About DIN 938 Studs – One End (Metal End) Screwing Into Component

DIN 938 Studs – One End (Metal End) Screwing Into Component are stud bolts produced and tested to the exact requirements of the DIN 938 specification. Featuring a Stud – One End configuration with Coarse & Fine thread form, they are available in property classes 5.8 / 8.8 / 10.9 / A2-70 / A4-70 across a size range of M4 to M52. The DIN 938 standard governs dimensional tolerances, mechanical properties including tensile strength, proof load and hardness, as well as surface finish requirements to ensure dependable performance in Engine Components and Pressure Vessels applications worldwide.
Our DIN 938 Studs – One End (Metal End) Screwing Into Component are cold-forged from certified bar stock, heat-treated where required, and thread-rolled to guarantee consistent fit and fatigue performance. Every batch is documented with an EN 10204 3.1 Mill Test Report covering chemical composition, mechanical test results and dimensional inspection. Available in zinc electroplated, hot-dip galvanised, Geomet, Dacromet and black oxide finishes to match corrosion-resistance requirements for Pumps, Flanges and Heavy Machinery applications. As a global exporter of DIN 938 fasteners, we consolidate orders with other standard-specification items into single shipments, backed by complete customs documentation for over 50 countries.
Technical Specifications

Raw Material

5.8 Alloy / Stainless Steel

Country of Origin

India

Standard Body

DIN

Corrosion Resistance

Salt-spray tested to relevant grade

Recommended Torque

Per property class / grade

Storage Conditions

Dry, corrosion-inhibited packing

DIN 938 Dimensions & Size Chart

Precise dimensional data for every DIN 938 Studs – One End (Metal End) Screwing Into Component size, cross-referenced against the standard’s key measurement points.
Size (M)b1 (mm)b2 (mm)L Range (mm)
M661820–100
M882225–120
M10102630–150
M12123035–200
M16163845–200
M20204655–200
M24245465–200
M30306680–200
Key Dimension Callouts

d

Nominal metric thread diameter across major thread.

l

Overall stud length excluding chamfered end points.

b

Nut-end thread length available for external engagement.

bm

Metal-end thread length screwed into tapped component.

Explore Additional DIN Fastener Standards and Technical Specifications

The DIN standards family covers a wide range of fastener standards for bolts, screws, nuts, washers, stud bolts, and threaded rods. Compare related DIN dimensions, tolerances, thread specifications, mechanical properties, material grades, and quality requirements to identify the most suitable engineering specifications for manufacturing, procurement, industrial applications, and mechanical fastening needs.
DIN 84
DIN 85
DIN 125A
DIN 126
DIN 127
DIN 128
DIN 315
DIN 433
DIN 434
DIN 436
DIN 439
DIN 440
DIN 557
DIN 562
DIN 603
DIN 608
DIN 609
DIN 610
DIN 6912
DIN 6914
DIN 6921
DIN 6923
DIN 7984
DIN 7985
DIN 7990
DIN 7991
DIN 9021
DIN 912
DIN 913
DIN 914
DIN 915
DIN 916
DIN 928
DIN 929
DIN 931
DIN 933
DIN 934
DIN 935
DIN 936
DIN 937
DIN 939
DIN 940
DIN 960
DIN 961
DIN 965
DIN 966
DIN 967
DIN 975
DIN 976-1
DIN 980
DIN 982
DIN 985
DIN 1587
DIN 6796
DIN 6797

DIN 938 Studs – One End (Metal End) Screwing Into Component – Material Grades & Property Classes

DIN 938 Studs – One End (Metal End) Screwing Into Component are available across multiple property classes and surface finish options to match load-bearing and corrosion-resistance requirements for Engine Components, Pressure Vessels and Pumps applications.
Property Classes
5.8 8.8 10.9 A2-70 A4-70
Surface Treatments
Zinc Electroplated Hot-Dip Galvanised (HDG) Geomet Coating Dacromet Coating Black Oxide Phosphate & Oil Plain (Self Colour) Nickel Plated

Why Choose Us for DIN 938 Studs – One End (Metal End) Screwing Into Component?

Nine reasons buyers worldwide rely on us as their DIN 938 Studs – One End (Metal End) Screwing Into Component manufacturer and export partner.
ISO Certified Production

Every batch of DIN 938 Studs – One End (Metal End) Screwing Into Component is manufactured under an ISO 9001:2015 certified quality management system with full in-process control.

EN 10204 3.1 MTR Supplied

A mill test report covering chemical composition, tensile, hardness and dimensional inspection accompanies every DIN 938 Studs – One End (Metal End) Screwing Into Component shipment.

48-hr Dispatch on Stock Items

Commonly stocked DIN 938 Studs – One End (Metal End) Screwing Into Component sizes leave our warehouse within 48 hours of order confirmation, minimising your downtime.

Export to 50+ Countries

Established freight and customs partners ensure reliable delivery of DIN 938 Studs – One End (Metal End) Screwing Into Component to buyers in over 50 countries worldwide.

Custom Sizes & Lengths

Non-standard DIN 938 Studs – One End (Metal End) Screwing Into Component lengths, diameters and special thread pitches are produced to order to match your drawing requirements.

Competitive Factory Pricing

Direct-from-factory pricing on DIN 938 Studs – One End (Metal End) Screwing Into Component with no middleman markup, offering the best value on volume and repeat orders.

In-House Metallurgical Testing

Hardness, tensile strength and dimensional checks for DIN 938 Studs – One End (Metal End) Screwing Into Component are performed in our in-house laboratory before every release.

Consolidated Multi-Standard Shipping

Combine DIN 938 Studs – One End (Metal End) Screwing Into Component with other standard-specification fasteners into a single container shipment to reduce freight costs.

Dedicated Export Documentation Team

Our specialist team prepares all customs, compliance and shipping paperwork for every DIN 938 Studs – One End (Metal End) Screwing Into Component export order.

DIN 938 Studs – One End (Metal End) Screwing Into Component – Applications & End Uses

DIN 938 Studs – One End (Metal End) Screwing Into Component are widely specified across multiple industries. Select an industry below to see how our DIN 938 stud bolts are applied.
DIN 938 Studs – One End (Metal End) Screwing Into Component are used in engine components for critical fastening applications where dimensional accuracy and mechanical performance are essential. Grade 5.8 is most commonly specified for engine components environments.
In pressure vessels, DIN 938 Studs – One End (Metal End) Screwing Into Component are valued for consistent dimensions and reliable load-bearing capability. We supply with full test documentation to support quality audits and project inspections.
DIN 938 Studs – One End (Metal End) Screwing Into Component are used in pumps assemblies where precise torque control and consistent fit are critical. We supply to OEM manufacturers and contractors with custom packaging formats.
For flanges applications, DIN 938 Studs – One End (Metal End) Screwing Into Component are supplied with material test reports, dimensional inspection certificates and PPAP documentation where required.
DIN 938 Studs – One End (Metal End) Screwing Into Component for heavy machinery use are selected from stainless steel or coated grades to provide appropriate corrosion resistance while maintaining specified mechanical performance.
In general engineering applications, DIN 938 Studs – One End (Metal End) Screwing Into Component are fastened into assemblies requiring long-term reliability. Our export-packaged DIN 938 stud bolts arrive protected from transit corrosion with full documentation.

Request a Quote for DIN 938 Studs – One End (Metal End) Screwing Into Component

Get pricing and lead times for your required sizes and quantities. ISO 9001 certified. EN 10204 3.1 MTR supplied. Export to 50+ countries.
022-6743-7972
+91 90226 36025
Email Us

Frequently Asked Questions About DIN 938

Common questions from buyers sourcing DIN 938 Studs – One End (Metal End) Screwing Into Component, covering sizes, grades, documentation and lead times.
We supply DIN 938 Studs – One End (Metal End) Screwing Into Component from M4 to M52 in Coarse & Fine thread. Standard lengths are stocked; non-standard lengths are produced to order. Contact us with your exact requirements for availability confirmation.
DIN 938 Studs – One End (Metal End) Screwing Into Component are supplied in 5.8 / 8.8 / 10.9 / A2-70 / A4-70. Carbon and alloy steel grades comply with ISO 898-1 and stainless steel grades comply with ISO 3506. ASTM grades are available for USA and Canadian export orders.
Every DIN 938 Studs – One End (Metal End) Screwing Into Component order includes an EN 10204 3.1 Mill Test Report covering chemical composition, tensile strength, hardness and proof load. Third-party inspection by SGS, BV or TUV can be arranged on request.
Stocked DIN 938 Studs – One End (Metal End) Screwing Into Component sizes dispatch within 48 hours of order confirmation. Custom lengths, special grades or surface finishes typically ship within 2-3 weeks. Contact us for a specific lead time on your required size and quantity.

Industrial Cities We Serve:

  • Ahmedabad
  • Aurangabad
  • Bengaluru
  • Chennai
  • Coimbatore
  • Faridabad
  • Gandhidham
  • Greater Noida
  • Gurugram
  • Hazira
  • Hosur
  • Hyderabad
  • Jamnagar
  • Jamshedpur
  • Ludhiana
  • Mumbai
  • Mundra
  • Mysuru
  • Nagpur
  • Nashik
  • Navi Mumbai
  • Noida
  • Pune
  • Rajkot
  • Sanand
  • Surat
  • Thane
  • Tiruppur
  • Vadodara
  • Visakhapatnam

Countries We Export To:

  • US
  • Canada
  • Mexico
  • Germany
  • UK
  • France
  • Italy
  • Spain
  • Netherlands
  • Belgium
  • Poland
  • Sweden
  • Norway
  • Denmark
  • Turkey
  • UAE
  • Saudi Arabia
  • Qatar
  • Oman
  • Kuwait
  • Bahrain
  • South Africa
  • Egypt
  • Nigeria
  • Australia
  • New Zealand
  • Singapore
  • Malaysia
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Brazil