DIN 966
Cross Recessed (Phillips) Pan Head Machine Screws – Metric
M2 to M10
Coarse
4.8 / A2-70 / A4-70
Phillips / Pan Head (DIN 966)
4.8 Alloy / Stainless Steel
India
DIN
Salt-spray tested to relevant grade
Per property class / grade
Dry, corrosion-inhibited packing
| Size (M) | dk (mm) | k (mm) | L Range (mm) |
|---|---|---|---|
| M2 | 4.0 | 1.6 | 3–20 |
| M2.5 | 5.0 | 2.1 | 4–25 |
| M3 | 5.6 | 2.4 | 5–30 |
| M4 | 8.0 | 3.1 | 6–40 |
| M5 | 9.5 | 3.7 | 8–50 |
| M6 | 12.0 | 4.6 | 10–60 |
| M8 | 16.0 | 6.0 | 12–80 |
| M10 | 20.0 | 7.5 | 16–100 |
Nominal thread diameter measured across the major thread.
Overall screw length measured from tip to head top.
Maximum raised countersunk head diameter at bearing edge.
Total head height including raised crown above countersink.
Every batch of DIN 966 Cross Recessed (Phillips) Pan Head Machine Screws – Metric is manufactured under an ISO 9001:2015 certified quality management system with full in-process control.
A mill test report covering chemical composition, tensile, hardness and dimensional inspection accompanies every DIN 966 Cross Recessed (Phillips) Pan Head Machine Screws – Metric shipment.
Commonly stocked DIN 966 Cross Recessed (Phillips) Pan Head Machine Screws – Metric sizes leave our warehouse within 48 hours of order confirmation, minimising your downtime.
Established freight and customs partners ensure reliable delivery of DIN 966 Cross Recessed (Phillips) Pan Head Machine Screws – Metric to buyers in over 50 countries worldwide.
Non-standard DIN 966 Cross Recessed (Phillips) Pan Head Machine Screws – Metric lengths, diameters and special thread pitches are produced to order to match your drawing requirements.
Direct-from-factory pricing on DIN 966 Cross Recessed (Phillips) Pan Head Machine Screws – Metric with no middleman markup, offering the best value on volume and repeat orders.
Hardness, tensile strength and dimensional checks for DIN 966 Cross Recessed (Phillips) Pan Head Machine Screws – Metric are performed in our in-house laboratory before every release.
Combine DIN 966 Cross Recessed (Phillips) Pan Head Machine Screws – Metric with other standard-specification fasteners into a single container shipment to reduce freight costs.
Our specialist team prepares all customs, compliance and shipping paperwork for every DIN 966 Cross Recessed (Phillips) Pan Head Machine Screws – Metric export order.
